Производитель: Gigabyte
Размер: 1.03 mb
Название файла:
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
Disabled Floppy A & B will be normal definition. • Boot Up Floppy Seek During POST, BIOS will determine the floppy disk drive installed is 40 or 80 tracks. 360 K type is 40 tracks 720 K, 1.2 M and 1.44 M are all 80 tracks. The default value is Enabled. Enabled BIOS searches for floppy disk drive to determine it is 40 or 80 tracks. Note that BIOS can not tell from 720 K, 1.2 M or 1.44 M drive type as they are all 80 tracks Disabled BIOS will not search for the type of floppy disk drive by track number. Note that there will not be any warning message if the drive installed is 360 K 4-11 6WMMC7 Series • Boot Up NumLock Status The default value is On. On Keypad is number keys. Off Keypad is arrow keys. • Gate A20 Option The default value is Fast. Normal Set Gate A20 Option is Normal. Fast Set Gate A20 Option is Fast. • Typematic Rate Setting The default value is Disabled. Enabled Enable Keyboard Typematic rate setting. Disabled Disable Keyboard Typematic rate setting. • Typematic Rate (Chars / Sec.) The default value is 6. 6-30 Set the maximum Typematic rate from 6 chars. Per second to 30 characters. Per second. • Typematic Delay (Msec.) The default value is 250. 250-1000 Set the time delay from first key to repeat the same key in to computer. • Security Option This category allows you to limit access to the system and Setup, or just to Setup. The default value is Setup. System The system can not boot and can not access to Setup page will be denied if the correct password is not entered at the prompt Setup The system will boot, but access to Setup will be denied if the correct password is not entered at the prompt 4-12 BIOS Configuration • OS Select For DRAM>64MB The default value is Non-OS2. Non-OS2 Using non-OS2 operating system. OS2 Using OS2 operating system and DRAM>64MB. • HDD S.M.A.R.T. Capability The default value is Disable. Enable Enable HDD S.M.A.R.T. Capability Disable Disable HDD S.M.A.R.T. Capability • Report No FDD For WIN 95 The default value is No. No Assign IRQ6 For FDD. Yes FDD Detect IRQ6 Automatically. 4-13 6WMMC7 Series 4.7. Advanced Chipset Features CMOS Setup Utility-Copyright( C ) 1984-1999 Award Software Advanced Chipset Features SDRAM CAS Latency Time Auto SDRAM Cycle Time Tras/Trc 5/7 SDRAM RAS-to-CAS Delay 2 SDRAM RAS Precharge Time 2 SDRAM Buffer Strength Auto DRAM Page Closing Policy Precharge Bank System BIOS Cacheable Enabled Video BIOS Cacheable Enabled Delayed Transaction Disabled On-Chip Video Window Size 64MB Local Memory Frequency 100 MHz * Onboard Display Cache Setting * Initial Display Cache Enabled Display Cache Timing Auto Item Help Menu Level ^v>