Оценок - 0, средний балл: 0
(
)
)
|
К этому устройству также есть другие инструкции:
Материнские платы - GA-8IG (599.96 kb)
Материнские платы - GA-8IG (1.36 mb)
Фрагмент инструкции
(Default Value) ..S3(STR) Set ACPI suspend type to S3. • ..........Power LED in S1 state ..Blinking In standby mode(S1), power LED will blink. (Default Value) ..Dual/Off In standby mode(S1): a. If use single color LED, power LED will turn off. b. If use dual color LED, power LED will turn to another color. • ..........Soft-off by PWR_BTTN ..Instant-off Press power button then Power off instantly. (Default value) ..Delay 4 Sec. Press power button 4 sec to Power off. Enter suspend if button is pressed less than 4 sec. 35 GA-8IG Motherboard • ..........PME Event Wake Up ..Disabled Disable this function. ..Enabled Enable PME Event Wake up. (Default Value) • .......... ModemRingOn ..Disabled Disable Modem Ring on function. ..Enabled Enable Modem Ring on function. (Default Value) • .......... Resume by Alarm You can set "Resume by Alarm" item to enabled and key in Data/time to power on system. ..Disabled Disable this function. (Default Value) ..Enabled Enable alarm function to POWER ON system. If RTC Alarm Lead To Power On is Enabled. Date ( of Month) Alarm : Everyday, 1~31 Time ( hh: mm: ss) Alarm : (0~23) : (0~59) : (0~59) • .......... Power On By Mouse ..Disabled Disabled this function. (Default value) ..Mouse Click Double click on PS/2 mouse left button. • ..........Power On By Keyboard ..Password Enter from 1 to 5 characters to set the Keyboard Power On Password. ..Disabled Disabled this function. (Default value) ..Keyboard 98 If your keyboard have “POWER Key” button, you can press the key to power on your system. • ..........KB Power ON Password ..Enter Input password (from 1 to 5 characters) and press Enter to set the Key board Power On Password. • ..........AC Back Function ..Memory System power on depends on the status before AC lost. ..Soft-Off Always in Off state when AC back. (Default value) ..Full-On Always power on the system when AC back. 36 BIOS Setup PnP/PCI Configurations CMOS Setup Utility-Copyright (C) 1984-2002 Award Software PnP/PCI Configurations PCI 1/PCI 5 IRQ Assignment PCI 2 IRQ Assignment PCI 3 IRQ Assignment PCI 4 IRQ Assignment Auto Auto Auto Auto Item Help Menu Level • • ........: Move Enter:Select F5:Previous Values +/-/PU/PD:Value F10:Save ESC:Exit F1:General HelpF6:Fail-Safe Defaults F7:Optimized Defaults Figure 6: PnP/PCI Configurations • ..........PCI 1/PCI 5 IRQ Assignment ..Auto Auto assign IRQ to PCI 1/PCI 5. (Default value) ..3,4,5,7,9,10,11,12,14,15 Set IRQ 3,4,5,7,9,10,11,12,14,15 to PCI 1/PCI 5. • ..........PCI 2 IRQ Assignment ..Auto Auto assign IRQ to PCI 2. (Default value) ..3,4,5,7,9,10,11,12,14,15 Set IRQ 3,4,5,7,9,10,11,12,14,15 to PCI 2. • ..........PCI 3 IRQ Assignment ..Auto Auto assign IRQ to PCI 3. (Default value) ..3,4,5,7,9,10,11,12,14,15 Set IRQ 3,4,5,7,9,10,11,12,14,15 to PCI 3. • ..........PCI 4 IRQ Assignment ..Auto Auto assign IRQ to PCI 4. (Default value) ..3,4,5,7,9,10,11,12,14,15 Set IRQ 3,4,5,7,9,10,11,12,14,15 to PCI 4. 37 GA-8IG Motherboard PC Health Status CMOS Setup Utility-Copyright (C) 1984-2002 Award Software PC Health Status Reset Case Open Status Disabled Case Opened No Item Help Menu Level • [Disabled] Don’t reset case open status [Enabled] Clear case open status at next boot • • ........: Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults Figure 7: PC Health Status • ..........Reset Case Open Status • ..........Case Opened If the case is closed, "Case Opened" will show "No". If the case have been opened, "Case Opened" will show "Yes". If you want to reset "Case Opened" value, set "Reset Case Open Status" to "Enabled" and save CMOS, your computer will restart. 38 BIOS Setup Frequency/Voltage Control CMOS Setup Utility-Copyright (C) 1984-2002 Award Software Frequency/Voltage Control CPU Clock Ratio CPU Host Clock Control x CPU Host Frequency (Mhz) x PCI/AGP Divider Host/DRAM Clock ratio Memory Frequency (Mhz) PCI/AGP Frequency (Mhz) 15X Disabled 100 Disabled Auto 266 33/66 Item Help Menu Level • • ........: Move Enter:Select F5:Previous Values +/-/PU/PD:Value F10:Save ESC:Exit F1:General HelpF6:Fail-Safe Defaults F7:Optimized Defaults Figure 8: Frequency/Voltage Control • ..........CPU Clock Ratio This option will not be shown or not be available if you are using a CPU with the locked ratio. ..10X~24X It’s depends on CPU Clock Ratio. • ..........CPU Host Clock Control Note: If system hangs up before enter CMOS setup utility, wait for 20 sec for times out reboot . When time out occur, system will reset and run at CPU default Host clock at next boot. ..Disable Disable CPU Host Clock Control.(Default value) ..Enable Enable CPU Host Clock Control. • ..........CPU Host Frequency ..100MHz ~ 355MHz Set CPU Host Clock from 100MHz to 355MHz. 39 GA-8IG Motherboard • ..........PCI/AGP Divider ..You can choose Disabled,PLL/40,PLL/32,PLL/24,PLL/20/PLL/16 mode to adjust PCI/AGP frequency. • ..........Host/DRAM Clock Ratio (Warning: wrong frequency may make system can’t boot, ...