Оценок - 0, средний балл: 0
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
♦ Dual channel memory architecture ♦ Support for DDR3 1333(O.C.)1066/800 MHz memory modules (Go to GIGABYTE's website for the latest supported memory speeds and memory modules.) * Onboard ♦ Integrated in the Chipset: Graphics - 1 x D-Sub port - 1 x DVI-D port, supporting a maximum resolution of 1920x1200 * The DVI-D port does not support D-Sub connection by adapter. 4) Audio ♦ Realtek ALC889 codec ♦ High Definition Audio ♦ 2/4/5.1/7.1 -channel * To configure 7.1-channel audio, you have to use an HD front panel audio module and enable the multi-channel audio feature through the audio driver. LAN ♦ 1 x Realtek RTL8111E chip (10/100/1000 Mbit) * Expansion Slots ♦ 1 x PCI Express x16 slot, running at x16 ♦ 2 x PCI Express x1 slots ♦ 1 x PCI slot 4^ Storage ♦ South Bridge: Interface - 4 x SATA 3Gb/s connectors supporting up to 4 SATA 3Gb/s devices USB ♦ South Bridge: - Up to 6 USB 2.0/1.1 ports (2 on the back panel, 4 via the USB brackets connected to the internal USB headers)® - Up to 8 USB 2.0/1.1 ports (4 on the back panel, 4 via the USB brackets connected to the internal USB headers)® ♦ Etron EJ168 chips:® - Up to 2 USB 3.0/2.0 ports on the back panel® in Internal ♦ 1 x 24-pin ATX main power connector Connectors ♦ 1 x 4-pin ATX 12V power connector ♦ 4 x SATA 3Gb/s connectors ® Only for GA-G41MT-USB3. © Only for GA-G41MT-D3V. - 7 - Hardware Installation Internal ♦ 1 x CPU fan header JUS Connectors ♦ 1 x system fan header ♦ 1 x front panel header ♦ 1 x front panel audio header ♦ 2 x USB 2.0/1.1 headers ♦ 1 x serial port header ♦ 1 x parallel port ♦ 1 x clearing CMOS jumper Back Panel ♦ 1 x PS/2 keyboard port Connectors ♦ 1 x PS/2 mouse port ♦ 1 x D-Sub port ♦ 1 x DVI-D port ♦ 4 x USB 2.0/1.1 ports® ♦ 2 x USB 2.0/1.1 ports® ♦ 2 x USB 3.0/2.0 ports® ♦ 1 x RJ-45 port ♦ 3 x audio jacks (Line In/Line Out/Microphone) I/O ♦ iTE IT8718 Hardware ♦ System voltage detection Monitor ♦ CPU temperature detection ♦ CPU/System fan speed detection ♦ CPU overheating warning ♦ CPU/System fan fail warning ♦ CPU fan speed control * Whether the CPU fan speed control function is supported will depend on the CPU cooler you install. ifL BIOS ♦ 2 x 8 Mbit flash Use of licensed AWARD BIOS ♦ Support for DualBIOS™ ♦ PnP 1.0a, DMI 2.0, SM BIOS 2.4, ACPI 1.0b Unique Features ♦ Support for @BIOS ♦ Support for Q-Flash ♦ Support for Xpress BIOS Rescue ♦ Support for Download Center ♦ Support for Xpress Install ♦ Support for Xpress Recovery2 ♦ Support for EasyTune * Available functions in EasyTune may differ by motherboard model. ♦ Support for Easy Energy Saver * Due to the hardware limitation, you must install the Intel®CoreTM 2 Extreme/ CoreTM 2 Quad/ CoreTM 2 Duo/Pentium Dual-Core/Celeron Dual-Core/ Celeron 400 Series CPU to enable support for Easy Energy Saver. ♦ Support for Smart Recovery ® Only for GA-G41MT-USB3. ® Only for GA-G41MT-D3V. Hardware Installation - 8 - Unique Features ♦ Support for ON/OFF Charge ♦ Support for Q-Share 3 felted ^ Norton Internet Security (OEM version) Software y ' ' и ^ ♦ Support for Microsoft® Windows 7/Vista/XP я Form Factor ♦ Micro ATX Form Factor; 24.4cm x 19.4cm * GIGABYTE reserves the right to make any changes to the product specifications and product-related information without prior notice. 1-3 Installing the CPU and CPU Cooler /\ Read the following guidelines before you begin to install the CPU: / \ • Make sure that the motherboard supports the CPU. (Go to GIGABYTE's website for the latest CPU support list.) • Always turn off the computer and unplug the power cord from the power outlet before installing the CPU to prevent hardware damage. • Locate the pin one of the CPU. The CPU cannot be inserted if oriented incorrectly. (Or you may locate the notches on both sides of the CPU and alignment keys on the CPU socket.) • Apply an even and thin layer of thermal grease on the surface of the CPU. • Do not turn on the computer if the CPU cooler is not installed, otherwise overheating and damage of the CPU may occur. • Set the CPU host frequency in accordance with the CPU specifications. It is not recommended that the system bus frequency be set beyond hardware specifications since it does not meet the standard requirements for the peripherals. If you wish to set the frequency beyond the standard specifications, please do so according to your hardware specifications including the CPU, graphics card, memory, hard drive, etc. Installing the CPU A. Locate the alignment keys on the motherboard CPU socket and the notches on the CPU. Triangle Pin One Marking on the CPU - 9 - Hardware Installation 1-4 Installing the Memory A Read the following guidelines before you begin to install the memory: • Make sure that the motherboard supports the memory. It is recommended that memory of the same capacity, brand, speed, and chips be used. (Go to GIGABYTE's website for the latest supported memory spee...