Оценок - 0, средний балл: 0
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
(Default) » Extreme Lets the system operate at its best performance level. o- Extreme Memory Profile (X.M.P.) |No,e| Allows the BIOS to read the SPD data on XMP memory module(s) to enhance memory performance when enabled. » Auto Lets the BIOS automatically detect whether a XMP memory module is installed. If a XMP memory module is installed, this function will be enabled. (Default) * Profilel Uses Profile 1 settings. * Profile2 |No,e| Uses Profile 2 settings. ►► Disabled Disables this function. <*■ (G)MCH Frequency Latch Allows you to fix the chipset frequency at system bootup. Options for adjusting memory multiplier below may differ according to the fixed frequency. Options are: Auto (default), 200MHz, 266MHz, 333MHz, 400MHz. o- System Memory Multiplier (SPD) Allows you to set the system memory multiplier. Options are dependent on CPU FSB and the (G)MCH Frequency Latch settings. Auto sets memory multiplier according to memory SPD data. (Default: Auto) o- Memory Frequency (Mhz) The first memory frequency value is the normal operating frequency of the memory being used; the second is the memory frequency that is automatically adjusted according to the CPU Host Frequency (Mhz) and System Memory Multiplier settings. o- DRAM Timing Selectable (SPD) Manual allows all DRAM timing control items below to be configurable. Options are: Auto (default), Manual. (Note) This item appears only if you install a memory module that supports this feature. BIOS Setup - 42 - >>>>> Standard Timing Control c CAS Latency Time Options are: Auto (default), 4~11. o- tRCD Options are: Auto (default), 1~15. o- tRP Options are: Auto (default), 1~15. o- tRAS Options are: Auto (default), 1~63. >>>>> Advanced Timing Control o- Advanced Timing Control >>>>> Advanced Timing Control O- tRRD Options are: Auto (default), 1~15. o- tWTR Options are: Auto (default), 1~31. o- tWR Options are: Auto (default), 1~31. o- tRFC Options are: Auto (default), 1~255. o- tRTP Options are: Auto (default), 1~15. o- Command Rate(CMD) Options are: Auto (default), 1~3. - 43 - BIOS Setup >>>>> Channel A/B a- Channel A/B Timing Settings CMOS Setup Utility-Copyright (C) 1984-2009 Award Software Channel A/B Timing Settings x Static tRead Value x tRD Phase0 Adjustment x tRD Phase1 Adjustment x tRD Phase2 Adjustment x tRD Phase3 Adjustment x Trd2rd(Different Rank) x Twr2wr(Different Rank) x Twr2rd(Different Rank) x Trd2wr(Same/Diff Rank) x DIMM1 Clock Skew Control x DIMM2 Clock Skew Control x DDR Write Leveling x DDR Write Training : Move Enter: Select F5: Previous Values Item Help Menu Level ►►► +/-/PU/PD: Value F6: Fail-Safe Defaults ESC: Exit F1: General Help F7: Optimized Defaults Static tRead Value Options are: Auto (default), 1~15. tRD PhaseO Adjustment Options are: Auto (default), 0-Normal, 1-Advanced. tRD Phasel Adjustment Options are: Auto (default), 0-Normal, 1-Advanced. tRD Phase2 Adjustment Options are: Auto (default), 0-Normal, 1-Advanced. tRD Phase3 Adjustment Options are: Auto (default), 0-Normal, 1-Advanced. Trd2rd(Different Rank) Options are: Auto (default), 1~15. Twr2wr(Different Rank) Options are: Auto (default), 1~15. Twr2rd(Different Rank) Options are: Auto (default), 1~15. Trd2wr(Same/Diff Rank) Options are: Auto (default), 1~15. DIMM1 Clock Skew Control Options are: Auto (default), +800ps~-700ps. DIMM2 Clock Skew Control Options are: Auto (default), +800ps~-700ps. 5 0 0 0 0 Auto Auto Auto Auto Auto 9 7 8 8 Auto Auto Auto Auto Auto Auto Auto Auto F10: Save BIOS Setup - 44 - c DDR Write Leveling Allows you to determine whether to fine-tune memory parameters to enhance memory compatibility. ►►Auto Lets the BIOS decide whether to enable this function. (Default) ►► Enabled Enables this function to enhance memory compatibility. ►► Disabled Disables this function. o- DDR Write Training Allows you to determine whether to fine-tune memory parameters to enhance memory compatibility. ►►Auto Lets the BIOS decide whether to enable this function. (Default) ►► Enabled Enables this function to enhance memory compatibility. ►► Disabled Disables this function. o- Channel A/B Driving Settings a- Driving Strength Profile Allows the BIOS to automatically set the Driving Strength Profile. o- Data Driving Pull-Up Level Options are: Auto (default), +8~-7. o" Cmd Driving Pull-Up Level Options are: Auto (default), +8~-7. o- Ctrl Driving Pull-Up Level Options are: Auto (default), +8~-7. Clk Driving Pull-Up Level Options are: Auto (default), +8~-7. o- Data Driving Pull-Down Level Options are: Auto (default), +8~-7. o- Cmd Driving Pull-Down Level Options are: Auto (default), +8~-7. o- Ctrl Driving Pull-Down Level Options are: Auto (default), +8~-7. - 45 - BIOS Setup c Clk Driving Pull-Down Level Options are: Auto (default), +8~-7. ******** Mother Board Voltage Control ******** >>> CPU o- Load-Line Calibration Enables or disables Load-Line Calibration. Enabling this fea...