Оценок - 2, средний балл: 3.5
(
)
)
|
Фрагмент инструкции
Release the legrest lever. Once you have released the legrest slide lever the legrest will click into place and lock. When you wish to retract the legrest, pull the legrest slide lever to release the legrest. Raise your legs slightly to allow the springs to retract the legrest. 14 WHEN YOU WANT TO CREATE YOUR OWN MASSAGE PROGRAM (SELF PROG.) Movement Display • This displays the program that is currently in use. Pressure Level Display - • This displays the amount of pressure exerted on the body. Display of Massage Areas - • The massage points currently being massaged flash. Degree of Fatigue Display •This is used In the Self Program to Indicate how tired you are In each area of your back and legs. — Program Strength Display • This displays the strength of the selected program. Please ensure that the cover is closed securely. 1. Press .öl. • Programmed Operation buttons (four) and the Self Program buttons will start to flash. 2. Press Sc :>xa . • The Degree of Fatigue indicators on the display will all start to flash on the neck area. • The massage heads will not start to move until you press f ok ). • It is not possible to use the Self Program if the cover of the control panel is not completely closed. 3. Select the degree of Fatigue. (1) Press (iocafcn') to select the desired area of the body. The button will toggle down each time you press it. -NECK -SHOULDER -BACK - LOWER BACK -LEGS > The area of the body selected will start to flash. (2) Press fatigue to select the degree of fatigue. The degree of fatigue will decrease as you continue to press the button. After reaching the minimum setting, if you press the button again it will return to the maximum setting. The greater your selection, the more time and movement will be spent on that area. (See Page 18 for examples.) (3) Press ( o* 1 after you have finished inputting settings for the various parts of the body. The massage lounger will automatically create the massage program best suited to the information you have input. Your selections will not be recorded until you have pressed [ 0K ). 15 4. Sit back in the seat as far as possible with your head on the pillow (back cushion, backrest). After pressing f °K J the seat will automatically recline to the massage position and body searching will commence. • You will feel a light tapping sensation on your shoulders. Always check the shoulder position and when necessary adjust it manually. After body searching has been completed the massage will begin. • The air massage on the lower body will commence at the same time that body searching commences. (If the legs has not been selected then the air massage will not commence.) • You can freely adjust the angle of the backrest and legrest. • Slide the legrest to adjust the position of your knees and calves. (See extending the legrest on Page 14.) - Self Program Example- “My shoulders and lower back are a bit sore today so I think I’ll focus on those areas.” (1) I just want a light massage on my neck so I’ll set this at 1. Press (2) My shoulders are (3) My back’s fine so (4) My lower back really stiff so I’ll I’ll set this at 0. feels pretty stiff set this at 5. ..................... Press ,—;—. Press [ fatigurid^^ {fatigueHrC
Мебель - EP3203 (5.52 mb)