Оценок - 3, средний балл: 3.7
(
)
)
|
Фрагмент инструкции
Please read the instructions before using the appliance, to avoid any risk arising from improper use. 1. DESCRIPTION OF THE CLIPPER AND ITS ACCESSORIES A. On/off button B. Adjustable comb attachment C. Cutting-length adjustment button D. Cutting-length indicator (3-6-9-12-15-18-21). E. Cutting head F. Power "on" indicator G. Adapter H. Cleaning brush I. Lubricating oil J. Barber's comb (with certain models only) K. Pair of scissors (with certain models only) L. Storage pouch (with certain models only) + Instruction booklet. 2. PREPARING FOR USE Voltage: •Your appliance has been designed to use 220-240V only. • Check that this voltage matches the voltage of your electricity supply. You have chosen a rechargeable appliance, designed for use with mains power or in autonomous (cordless) mode. A.Mains operation: • Switch the On/Off button to 0 (Fig. 2) • Plug the connector into the appliance (Fig. 3) and the adapter into the mains socket (Fig. 4) •Turn the appliance on (Fig. 5) ¦During use, the appliance does not recharge. B.Cordless operation: The appliance functions with its accumulators. • Before using it for the first time, charge the appliance with the adapter for 14 hours. The next 3 times you use your clipper, it is important to let it discharge completely. The recommended charging time is 8 hours. When the charging indicator is red, your appliance is charging. • Once the transformer has been unplugged, the appliance is ready for 40 minutes of cordless operation. IMPORTANT: 1) To optimise the cutting power of your blades, it is essential to oil them before each use.See paragraph 7. 2) To avoid damaging the accumulators: • Never charge them for longer than 20 hours at a time. • Only charge the accumulators when there is a noticeable drop in the appliance's performance, or if the appliance has not been used for over 6 months. 3. SAFETY PRECAUTIONS • Unplug the appliance before removing the comb attachment, lubricating the blades, etc. and after use. • Any error when connecting the appliance can cause irreparable harm, not covered by the guarantee. • Do not use or recharge the clipper near baths, basins, showers or other recipients containing water. •Your appliance is designed for use in the home only. Do not use the clipper for more than 10 minutes without a pause. • Important:the clipper and the adapter must not be immersed or held under running water. • Do not leave the appliance for long periods at temperatures below 0°C or above 40°C (behind glass in full sunlight, for example). • Do not expose the appliance to direct sunlight for long periods. • Do not use an extension lead in your bathroom. • Keep the cord, appliance and accessories away from any source of heat. GB • Never use the appliance if it is not working correctly, or if it has fallen (invisible damage to the appliance could put your safety at risk). • When you are using the clipper, keep it well away from eyelashes, clothes and any other object, to avoid any risk of injury or blockage. • If the clipper is used by several people, the cutting head should be cleaned appropriately. • Close supervision is necessary when the appliance is used on or in the presence of children or disabled people. • Never leave the clipper within the reach of children. • Be careful when you are using the clipper for the first time. Take your time. Use slow, controlled gestures. • Do not use the clipper on animals. • Do not use the appliance: - on injured skin. - if you have dermatological problems: eczema, varicose veins, skin inflammations, moles, acne, warts, birth marks, etc. • Special tools are required to dismantle this appliance. Any maintenance work must be carried out by the manufacturer, its after-sales service or a person with similar qualifications, to avoid all danger. • Cutting and styling advice is offered purely as a guide, and Rowenta can not be held responsible in the event that the results obtained do not fulfil the user's expectations. • For any malfunctions, see "Troubleshooting", or contact our Customer Helpdesk or your dealer. 4. 7-SETTING ADJUSTABLE COMB ATTACHMENT • Your clipper is fitted with a comb attachment that allows you to choose the cutting length. • To select one of the settings: push the comb to align it with the desired setting (Fig. 6). • The cutting length (in mm) is shown on the sides of the clipper (Fig. 7) (3,6,9,12,15,18 or 21 mm). These values are purely indicative; the actual cutting length may vary according to the angle at which the clipper is held. 5. USING THE CLIPPER WITHOUT THE COMB ATTACHMENT • For shaved-head cuts or outlining, you can remove the comb attachment by sliding it off as shown in fig. 8. 6. CLEANING • The clipper requires very little cleaning. You can clean it with a slightly damp cloth. To clean the adjustable comb attachment, remove it as shown in fig. 8 and use the cleaning brush to remove any hair (Fig. 9). • After each use, the cutting blades should be cleaned with the cleaning brush (Fig. 10). 7. LUB...