Оценок - 4, средний балл: 4.3
(
)
)
|
Фрагмент инструкции
You must read and understand this Operator’s Manual and especially the Safety Precautions for proper and safe operation. Cub Cadet Commercial's philosophy is to continually improve all of its products. As a result, engineering changes and improvements are made from time to time. If the operating characteristics or the appearance of your clipper differ from those described in this Operator’s Manual, please contact your Cub Cadet Commercial dealer for information and assistance. Contact your Cub Cadet Commercial dealer if you do not understand any of the instructions in this manual. Although hazard control and accident prevention are partially dependent upon the design and configuration of the clipper, these factors are also dependent upon the awareness, concern, prudence and proper training of the personnel involved in the operation, transport, maintenance and storage of the clipper. ^kwARNING Indicates a strong possibility of severe personal injury or death if instructions are not followed. ^kcAUTION Indicates a possibility of personal injury or equipment damage if instructions are not followed. IMPORTANT: This enclosed message provides information necessary for the protection of the unit. NOTE: This enclosed message provides tips for use, care and maintenance of the unit. A WARNING The engine exhaust from this product contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. 1 SAFETY PRECAUTIONS GENERAL: 1. It is Important that you read, fully understand and observe the following safety precautions and warnings. Read the Operator's Manual and the safety instructions periodically. 2. Do not lend or rent out your clipper without the Operator's Manual. Be sure that anyone using your clipper understands the information contained in this Operator's Manual. 3. Careless or improper use of this clipper may cause serious or even fatal injury. 4. The use of the clipper can be hazardous. If the cutting blade comes in contact with your body, it will cut you. When it comes in contact with solid foreign objects such as rocks or bits of metal, it may fling them directly or by ricochet in the direction of bystanders or the operator. 5. Cub Cadet Commercial does not recommend the use of hedge clippers when cutting in areas where the blade could contact such objects. PHYSICAL CONDITION: You must be in good physical condition and mental health and not under the influence of any substance (drugs, alcohol, etc.) which might impair vision, dexterity or judgment. Do not operate the clipper when you are fatigued. 1. Be alert - if you get tired while operating your clipper, take a break. Fatigue may result in loss of control. Working with the clipper can be strenuous. If you have any condition that might be aggravated by strenuous work, check with your doctor before operating the clipper. 2. Prolonged use of the clipper (or other machines) exposing the operator to vibrations may produce whitefinger disease (Raynaud's phenomenon) or carpal tunnel syndrome. These conditions reduce the hand's ability to feel and regulate temperature, produce numbness and burning sensations and may cause nerve and circulation damage and tissue necrosis. Antivibration systems do not guarantee that you will not sustain whitefinger disease or carpal tunnel syndrome. Therefore, continual and regular users should monitor closely the condition of their hands and fingers. If any of the above symptoms appear, seek medical advice immediately. PROTECTIVE CLOTHING: Clipper operation can cause serious injury to eyes, ears and body. The deflector provided with your clipper may not protect the operator from all foreign objects (gravel, debris, wire, etc.) thrown by the blade. Thrown objects may also ricochet and strike the operator. 1. Clothing must be sturdy and snug-fitting, but allow complete freedom of movement. Avoid loose-fitting jackets, scarfs, neckties, jewelry, flared or cuffed pants, unconfined long hair or anything that could become caught on branches, brush or moving parts of the unit. Wear long pants made of heavy material to protect your legs. DO NOT WEAR SHORTS. 2. To reduce the risk of injury to your eyes, never operate the clipper unless wearing goggles or properly fitted safety glasses with adequate top and side protection complying with ANSI Z 87.1. 3. To reduce the risk of injury to your face Cub Cadet Commercial recommends that you also wear a face shield or face screen over your goggles or safety glasses. 4. Clipper noise may damage your hearing. Wear sound barriers (ear plugs or ear mufflers) protect your hearing. Continual and regular user should have their hearing checked regularly. 5. Protect your hands with gloves when handling the clipper. Heavy-duty, nonslip gloves improve your grip and protect your hands. 6. Good footing is most important in clipper work. Wear sturdy boots with nonslip soles. Steeltoed safety boots are recommended. 7. Wear an approv...