Оценок - 5, средний балл: 3.6
(
)
)
|
Фрагмент инструкции
When epilating behind the knee, keep the leg stretched out straight. 4 Underarm and bikini line epilation For this specific application, the underarm cap (8) has been developed as an optional attachment to be placed on the epilation head (2). Please be aware that especially at the beginning, these areas are particularly sensitive to pain. Therefore, we recommend that you select speed setting «I» for the first few epilation processes. With repeated usage the pain sensation will diminish. For more comfort, ensure that the hair is at the optimum length of 2-5 mm (0.08 - 0.2 in.). Before epilating, thoroughly clean the respective area to remove residues (like deodorant). Then carefully dab dry with a towel. When epilating the underarm, keep your arm raised up so that the skin is stretched and guide the appliance in different directions. As skin may be more sensitive directly after epilation, avoid using irritating substances such as deodorants with alcohol. 5 Facial epilation For removing any unwanted hair from the face or other sensitive areas, use the precision cap (9) as an optional attachment to be placed on the epilation head (2). For the first few usages, we recommend that you select speed setting «I» in order to get used to the epilation sensation in those sensitive areas. Prior to epilation, we recommend cleaning the skin with alcohol to promote good hygiene. When epilating the face, stretch the skin with one hand and slowly guide the epilator with your other hand the direction of the switch. 10 Overheating protection As a safety feature to avoid the unlikely event of the appliance overheating, it may happen that the red low charge light shines permanently for 8 seconds and then the appliance turns off automatically. In this case, turn the switch back to the position «0» and let the appliance cool down. 6 Cleaning the epilation head Regular cleaning ensures better performance. a Brush cleaning: Remove the cap and brush it out. Thoroughly clean the tweezers from the rear side of the epilator head with the brush dipped into alcohol. While doing so, turn the tweezer element manually. This cleaning method ensures best hygienic conditions for the epilation head. b Cleaning under running water: After each wet usage, clean the appliance under running water. Remove the cap. Hold the appliance under hot running water. Then press the release button (6) to remove the epilation head. Thoroughly shake both, the epilation head and the appliance to make sure that remaining water can drip out. Leave both parts to dry. Before reattaching, make sure that they are completely dry. B Using the shaver head attachment a OptiTrim comb b Shaver foil c Trimmer d Release buttons e Trim/shave selector f Cutter block g Shaver head base Shaving • Put on the shaver head attachment (10) by clicking it in. • Pressing one of the lock keys, turn the switch clockwise to setting «II». • Make sure the trim/shave selector is in the « 3» position. • Use the shaver head attachment on dry skin only. • For best results, always make sure that both, the shaver foil (b) and the trimmer (c) are in contact with the skin (A). Keeping your skin stretched (B), slowly move the appliance against the direction of hair growth. The trimmer first raises all long hairs and cuts them off. Then the flexible foil follows to smooth away any stubble. • When shaving or trimming in sensitive areas, make sure that you always keep your skin stretched to avoid injuries. Contour trimming For trimming precise line and contours, lock the long hair trimmer by sliding the trim/ shave selector (e) to the position « 8 » (C1). Pre-cutting hair for epilation If you choose to pre-cut your hair to the ideal length for epilation, place the OptiTrim comb (a) onto the shaver head. Slide the trim/shave selector to the « 0 » position. Hold the appliance with the OptiTrim comb lying flat on the skin. Guide it with the comb tips against the hair growth as shown in illustration C2. N.B. As hair does not always grow in the same direction, also guide the appliance slightly diagonally or in different directions in order to achieve best results. 11 Cleaning the shaver head Brush cleaning • Press the release buttons (d) to remove the shaver head (D1). Tap the bottom of the shaver head gently on a flat surface (not on the foil). • Brush out the cutter block and the inside of the shaver head. However, do not clean the shaver foil with the brush as this may damage the foil. Cleaning with water Press the release buttons (d) to remove the shaver head. Rinse the shaver head and the cutter block separately under running water (D2). Leave the cutter block and the foil frame to dry separately before reattaching them. Keeping your shaver head attachment in top shape • The shaving parts need to be lubricated regularly every 3 months (E). If you clean the shaver head under running water, please lubricate it after every cleaning. • Apply some light machine...