Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
Dear customer, you have made the right choice! Your new Philips 3D Hair Clipper adapts to the contours of the head and enables comfortable use. . To enjoy using this Philips 3D hair clipper for a long time, we advise you to read the following information. . In the enclosed booklet 'Modelling and Styling' and on the interactive instruction CD-ROM you can find instructions and many useful tips on how to create the haircut you want. Important Appliance . Keep the appliance and the adapter dry. . Check if the voltage indicated on the mains plug corresponds to the mains voltage in your home before you connect the appliance. . This appliance is suitable for mains voltages from 220 to 240 Volts. . Only use the adapter supplied to charge the appliance. . The adapter contains a transformer. Do not cut off the adapter to replace it with another plug, as this will cause a hazardous situation . If the adapter is damaged, always have it replaced by one of the original type in order to avoid a hazard. . Use, charge and store the appliance at a temperature between 15c and 35c. . Keep the appliance out of the reach of children. . This appliance is only intended for clipping human hair. Do not use it for any other purpose. Charging Charge the appliance for 12 hours (HQC888)/ 8 hours (HQC884) before you star t using it for the first time. A fully charged appliance has a cordless clipping time of up to 50 minutes (HQC 888)/ 35 minutes (HQC 884). ENGLISH Do not charge the appliance for more than 24 hours. 1 Make sure the appliance is switched off while charging. 2 Insert the appliance plug into the appliance (fig. 1). 3 Insert the adapter into the wall socket. The pilot light will go on to indicate that the appliance is charging. Optimising the lifetime of the battery -After the appliance has been charged for the first time, do not recharge it between clipping sessions. Continue using it and recharge it only when the batter y is (almost) empty. -Discharge the batter y completely twice a year by letting the motor run until it stops. -Do not keep the appliance plugged into a wall socket all the time. -If the appliance has not been used for a long period of time, it must be recharged for 12 hours. Corded clipping Do not run the appliance from the mains when the battery is fully charged. To use the hair clipper when it is connected to the mains: 1 Switch the hair clipper off, connect it to the mains and wait a few seconds before switching it on. 2 If the battery is completely empty, wait a few minutes before switching the appliance on. Using the appliance Also see the interactive instruction CD-ROM. Clipping with comb attachment Select the small or large comb attachment, depending on the desired hair length. ENGLISH Hair length settings . The hair length settings are indicated in millimetres on the arms of the comb attachment.The settings correspond to the remaining hair length after cutting (fig. 2). -The small comb cuts hair to a length of 3 mm, 6 mm, 9 mm, 12 mm, 15 mm, 18 mm or 21 mm. -The large comb cuts the hair to a length of 23 mm, 26 mm, 29 mm, 32 mm, 35 mm, 38 mm or 41 mm. 1 Slide the arms of the comb attachment into the guiding grooves of the appliance until you hear a click (fig. 3). Make sure that the arms of the comb attachment have been properly slid into the grooves on both sides. 2 Set the comb to the desired hair length by turnin...
Эта инструкция также подходит к моделям:Машинки для стрижки - HQC888/30 (4.75 mb)
Машинки для стрижки - HQC884/00 (4.75 mb)