Оценок - 1, средний балл: 5
(
)
)
|
Фрагмент инструкции
ER153 N: de modèles ER153 Modelo No. ER153 Pílíllj ; щ ♦ Ríase read 'hese insinuions cnmptelely hetore u$e, ñnrt save fr*s mam ml for future use • Vci.ii«/ ir- ints3r^Hir«£ üü шйгшпш û.îjv. jjíiaiío «адгши ca marul aaar u-uiU&cit iA* wt * Ш tk ti íMfdW i£ ССГf)CIflirCf<55 :££ IWJUX»2r€S vxnseve SSôfTVyijal üár2 fUJj'3SCC«tl!lü IMPORTANT SAFETY INSTRUCTIONS When using an electrical appli- including the following, ance, basic precautions Read all instructions before should always be followed, using this appliance. DANGER To reduce the risk of electric shock: 1.Do not reach for the appliance that has fallen into water. Unplug immediately. 2. Do not use while bathing or in a shower. 3. Do not place or store charging adaptor where it can fall into a tub or sink. Do not place in or drop into water or other liquid. 1/1/ A DMIM/"* To reduce the risk of burns, fire, electric VV MlllMIIMwl shock, or injury to persons: 1.Do not use this clipper with erly, if it has been dropped 4. Always charge the clipper in a cool, dry place. 5.Except when charging, always unplug the charging adaptor from the electrical outlet. 6. Unplug this appliance before cleaning. damaged clipper blades as injury may occur. 2. Close supervision is necessary when this clipper is used by, on or near children or invalids. 3.Use this appliance only for its intended use as described in this manual. Do not use attachments not recommended by the manufacturer. 4. Never operate this appliance if it has a damaged cord or plug, if it is not working prop- or damaged. Return the appliance to a service center for examina-. tion and repair. 5.Keep the cord away from heated surfaces. 6.Never drop or insert any object into any opening. 7.Do not use outdoors or operate where aerosol (spray) products are being used or where oxygen is being administered. SAVE THESE INSTRUCTIONS 2 INDEX ENGLISH FRANÇAIS ESPAÑOL Page 2 Page 7 Página 10 3 4 Before using the hair clipper This clipper is designed for professional use to trim hair and beards. Charge for 12 hours before using the clipper for the first time in order to activate the built-in rechargeable battery. The clipper can be operated on either an AC power source or a rechargeable battery. Read all instructions carefully before use. Parts identification (Fig. 1) (A) On/off Switch (B) Charging indicator Lights up when the contact plug receptacle (F) is connected to an AC power source for charging. (C) Blade (D) Dial (Height adjustment control) Turn the dial clockwise or counterclockwise to adjust the moving blade back and forth to get the desired height. Adjustable in 5 stages from l/32"(0.8 mm) to 5/64"(2.0 mm) in 1/64"{0.3 mm) steps without attachment. (E) Trimming position mark (F) Contact plug receptacle (G) Cord release button (H) Extra Short comb attachment (4mm, 3/16 ") (I) Short comb attachment (6 mm, 1/4") (J) Medium comb attachment (9 mm, 3/8") (K) Long comb attachment (12 mm, 1/2") Use these comb attachments to control the trimming height (Fig. 3) (L) Stationary blade (M) Moving blade (N) Cleaning hook (O) Hook (P) Power cord unit (RE5-66) (Q) Charging stand (Ft) Comb attachment shelves (S) Contact plug (T) Plug release button (U) Cleaning brush (V) Oil Operation How to charge and use as rechargeable unit Insert the contact plug {S) into the charging stand (Q) until it clicks firmly into position. Connect the power cord unit (P) into the power outlet. Place the hair clipper on the charging stand. The unit will automatically slide onto the contacts. When the charging indicator is lit, the unit is being charged. The switch should be set to “O” (off) during charging. An 8-hour charge will provide 55 minutes of use. After the main unit is charged, disconnect the contact plug (S) and simply switch to “I" (on) to operate. Using as a cord unit Push the button (T) to release the contact plug (S) from the charging stand. With the switch set to “O” (off), insert the contact plug in the contact plug receptacle (F) of the unit until it clicks firmly into position. To release the contact plug from the unit, push the release button (G) and pull out the contact plug (S) at the same time. How to use the comb attachments • To use the comb attachments always set the dial to “3”. • Slide in the comb attachment, as shown in Figure 3, • To remove, push up the attachment comb buttom with your thumb. • Four attachment combs are available, extra short (4mm, 3/16"), short (6mm, 1/4"), medium (9mm, 3/8"), and long (12mm, 1/2"). Blade care Hold the handle of the hair clipper firmly with (he on/off switch facing upward and push the upper part of the blade away from the housing. (See Fig. 4) Using ttie brush, clean the blade block and depress the 5 I cleaning hook to open the blade in order to remove hair which may be caught between the blades. (See Fig. 5) Lubricate the space between the stationary and moving blades with 2 cr 3 drops of oil after every few use...