Оценок - 4, средний балл: 4.5
(
)
)
|
Фрагмент инструкции
Always wear protective gloves! CAUTION : Start the blower only after having assembled itcompletely. 1. ASSEMBLY OF BLOWER PIPES 1) Align grooves in the blower pipe with pegs on the blower housing and slide the pipe onto housing. 2) Turn the blower pipe clockwise to lock it into place. 2. ASSEMBLY OF VACUUM ATTACHMENT 1) Installing Vacuum pipe (nozzle) (1) Loosen the screw . and open the protector . . WARNING! When using this machine as a blower, be sure to confirm that the screw . is not loosened at each time of startup. If the screw is loosened, retighten it. It is dangerous to operate the machine with the screw . loosened. The operator’s finger or clothing may be caught in the impeller, which will result in a serious accident. (2) Align the indicated on the vacuum pipe with the “ . “ indicated on the blower. Then insert the vacuum pipe into theblower. (3) Turn the vacuum pipe until the is aligned with the “ Ў “ indicated on the blower to lock the vacuum pipe. WARNING! Always hold the mounting end of the vacuum pipe when attaching/ detaching the vacuum pipe. 2) Installing Elbow and Dust Bag (1) Open the fastener of the dust bag. (2) Insert the elbow into the dust bag and take it out through thebag’s entry. (3) Install the elbow on the blower. WARNING! Do not attempt to pick up large wood chips, metals, glass, stones, liquids, lighted cigarettes, fire works or the like. Always mount the protector/vacuum pipe in the right way before operation. Operation without the protector/vacuum pipe is dangerous, the impeller may catch the operator’s fingers or clothes and it can result in serious injury. . . Screw Protector 8 BEFORE START OF OPERATION 1. Inspection and Refill of Engine Oil (1) Perform the following procedure, with the engine cooled down. • Inspection: Please inspect whether it makes the machine horizontal, removes the oil cap, there is a oil to inside the range of the upper limit lower limit mark of gauge. When it is insufficient, (especially, when it has not reached to the lower limit level), please refill new oil. • Refill: Verticality (under the suction port cover) please do the machine, remove the oil cap. When oil is supplied from the oil pipe port and oil level comes to the shelf inside the oil pipe, please stop oil supply. (2) For reference, the oil refill time is about 10 h (refill frequency: 10 times). (3) If the oil changes in color or mixes with dirt, replace it with new one. (For the interval and method of replacement, refer to P. 14) Recommended oil: SAE 10W-30 oil of API Classification, Class SF or higher (4-stroke engine for automobile) Oil volume: Approx. 0.08 L (2.7 fl.oz) Inspection method of engine oil Upper limit Lower limit Upper limit Lower limit NOTE • • If the engine is not kept upright, oil may go into around the engine, and may be refilled excessively. If the oil is filled above the limit, the oil may be contaminated or may catch fire with white smoke. • Remove dust or dirt near the oil refill port, and detach the oi...
Эта инструкция также подходит к моделям:Машинки для стрижки - PS-410 (3.24 mb)
Машинки для стрижки - PB-500 R (3.24 mb)
Машинки для стрижки - PS-33 (3.24 mb)
Машинки для стрижки - PS-330 (3.24 mb)