Оценок - 4, средний балл: 3.5 ( )

Производитель: Electrolux Размер: 1 mb Название файла: Язык инструкции:

.INAKA. .IA THN E.I.HMAN.H TOY KATA..H.OY .PO.Y.AKTHPA, ME .IA.OPA KO.TIKA EAPTHMATA DO.RU B‹R G‹Y‹M fiEKL‹ ‹C‹N OZETLEY‹C‹ TABELA KES‹C‹ KAFA / EMN‹YET KORUNMASI 0,095” 2.4mm 3.0mm 197” 5000mm A 4T 9” 230 mm 4T 10” 255 mm 8T 10” 255mm 8T 9” 230mm 80T 9” 230mm 24T 9” 230mm 538249346 538040853 538248959 538026134 538248960 538026135 538248960 538036711 538248960 538036713 538248960 538040998 538240936 538240553 538236677 538040953 538240936 538240553 538236677 42/46 cc 34/36/38 cc 538249344 538042506 538248960 538026134 538248960 538026135 538248960 538036711 538248960 538036713 538248960 538040998 538240936 538240553 538236677 538040953 538240936 538240553 538236677 0,095” 2.4mm 3.0mm 197” 5000mm B GB DE FR NL NO FI SE DK ES PT IT HU GR CZ PL SK RU EE LV TR 1 2 3 4 5 1 2 3 4 5 7 8 6 E8 A B A. General description 1) ENGINE 2) SHAFT 3) THROTTLE TRIGGER 4) REAR CONTROL GRIP 5) BLADE 6) NYLON STRING HEAD 7) STOP SWITCH 8) FUEL ENRICHMENT LEVER 9) STARTER HANDLE 10) HARNESS RING 11) SPARK PLUG 12) AIR FILTER COVER PRODUCT IDENTIFICATION LABEL 13) FUEL TANK CAP 14) MUFFLER SHIELD 15) RIGHT CONTROL HANDLE 16) DELTA HANDLE 17) SAFETY LEVER 18) SAFETY POLE GUARD 19) STRING CUTTER BLADE 20) NYLON STRING HEAD GUARD EXTENSION 21) BLADE GUARD 22) ENGINE/SHAFT JOINT 23) DECOMPRESSION VALVE 24) SAFETY GUARD LEGEND: 2) Manufacturer's name and4) Product code 7) CE seal of con1) Guaranteed noise leveladdress 5) Serial no. formity according to directive2000/14/EC 3) Year of manufacture (lasttwo figures; e.g. 03=2003) 6) Model/type B. Safety precautions Explanation of Symbols Warning Safety apparel: Approved protective goggles or visor, approved hard hat and hearing protection. Read the instructions for the user carefully and make sure you understand how all the controls work. Safety apparel: Approved boots. Do not smoke when refueling or using the machine. Fuel enrichment (starting aid). Safety apparel: Approved gloves. Danger of flying debris. ENGLISH - 1 Danger of kickback. The blade is Minimum safety distance 15m. capable of amputating arms and legs. Emergency stop. Maximum shaft speed. Use of the manual • Anyone who uses the machine should have read the entire manual with extreme care. • All users should be familiar with the operations for use of the machine under absolutely safe conditions as described in this manual, and should be instructed in the proper cutting techniques to use, possibly by practical demonstration. • Do not allow children or persons who are not familiar with these instructions and are not sufficiently trained to use the brush cutter. Local regulations may specify an age limit for users. • Keep this manual with the machine when selling or lending it, to enable the future users to familiarize themselves with the product and instructions for safe use. • All parts of the manual are equally important for the purpose of preventing injury to the operator or damage to the machine. To facilitate your reading, section B is divided into parts that can be called up in the rest of the manual, marked with the "CAUTION" symbol followed by the number of the corresponding paragraph, to concentrate your attention on the main safety procedures related to a particular situation. Prior to use • Respect of the procedures described in this manual does not eliminate the risks of accidents but does reduce the probability of their occurring or the effect of the damage. • If you have never used a brush cutter before, practice using it for a while before actually starting to work with it. • The operator or user is responsible for any damages to third parties or their property, and for any dangers to which they may be subject. • Do not use this machine for any other purpose than that for which it was designed, using the proper cutting devices as indicated in the instructions. • Do not use the machine if you are tired, in poor health or under the effects of alcohol or medication that could affect your reactions. • Make sure you know how to stop the engine and blade if necessary (see section entitled "Starting and stopping the engine"). CAUTION! Danger of serious leg injuries. Take scrupulous care to follow the instructions in the manual. CAUTION! The cutting parts and muffler may get very hot and cause burns. Wait a w minutes before touching them. 1 Inspect the machine carefully before every use, in case of violent impact or signs of malfunction. Make sure the machine is correctly assembled, and all its parts are working properly. Make sure the screws are all in place and securely tightened. Check operation of the accelerator control block and make sure there is no leakage of fuel. Check that the cutting tool does not move with the motor running at idle speed. Make sure the transmission pipe is properly fastened to the motor joint and the line cutter head o...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: