Оценок - 3, средний балл: 3.7
(
)
)
|
Фрагмент инструкции
Be sure switch is OFF when plugging in Pole Trimmer. 4. Do Not Overreach - Keep proper footing and balance at all times when operating Pole Trimmer. A DANGER - RISK OF CUT -Keep hands away from blades at all times. Keep both hands on handle areas when Pole Trimmer is on. Do not attempt to remove cut material nor hold material to be cut when blades are moving. Do not grasp the exposed cutting blades or cutting edges when picking up or holding the Pole Trimmer. A CAUTION - Blades coast after turn off. 5. Disconnect Pole Trimmer - Disconnect the Pole Trimmer from the power supply • when not in use • before servicing • when changing accessories such as blades • when clearing jammed material from blades • when moving from one worksite to another 6. Do Not Force Pole Trimmer - It will do the job better and with less likelihood of a risk of injury at the rate for which it was designed. 7. Do Not Abuse Power Cord - Never carry Pole Trimmer by power cord or yank it to disconnect from receptacle. Keep power cord from heat, oil, and sharp edges. Before starting Pole Trimmer, make sure blades are not touching anything. For more information, visit 2 11G939 OWNER’S MANUAL A SAFETY WARNINGS Continued MAINTENANCE AND STORAGE OF POLE TRIMMER 1. Maintain Pole Trimmer With Care • Keep cutting edge sharp and clean for best performance and to reduce the risk of injury • Follow instruction for lubricating and changing accessories • Inspect Pole Trimmer cord periodically, and if damaged, have it repaired by an authorized service facility • Inspect extension cords periodically and replace if damaged • Keep handles dry, clean, and free from oil and grease 2. Check Damaged Parts • If a part is damaged, carefully check the damaged part before using the Pole Trimmer. Make sure the part will operate properly and perform its intended function. • Check for alignment of moving parts, binding of moving parts, breakage of parts, mounting, and any other condition that may affect its operation. • A guard or other part that is damaged should be properly repaired or replaced by an authorized service center unless indicated elsewhere in this manual. 3. When servicing Pole Trimmer, use only identical replacement parts. 4. To reduce the risk of electric shock, the Pole Trimmer has a polarized plug (one blade is wider than the other) and will require the use of a polarized extension cord. The Pole Trimmer’s plug will fit into a polarized extension cord only one way. If the plug does not fit fully into the extension cord, reverse the plug. If the plug still does not fit, obtain a correct polarized extension cord. A polarized extension cord will require the use of a polarized wall outlet. This plug will fit into the polarized wall outlet only one way. If the plug does not fit fully into the wall outlet, reverse the plug. If the plug still does not fit, contact a qualified electrician to install the proper wall outlet. Do not change the Pole Trimmer plug, extension cord receptacle, or extension cord plug in any way. 5. Store Idle Pole Trimmer Indoors - When not in use, the Pole Trimmer should be stored indoors in a dry location. Store Pole Trimmer above the reach of children or in a locked area out of the reach of children. This manual is your guide to safe and proper operation of the Pole Trimmer. SAVE THESE INSTRUCTIONS. UNPACKING 1. Remove Pole Trimmer and all other items from box. The Pole Trimmer comes fully assembled and ready to use. 2. Check all items for shipping damage. If you find any damage or if any parts are missing, promptly inform the dealer where you bought the Pole Trimmer or call 1-800-858-8501. PRODUCT IDENTIFICATION Cutter Blade Cord Retainer Figure 1 - Product Identification: Remington Pole Trimmer 110939 3 For more information, visit REMINGTON® ELECTRIC POLE TRIMMER OPERATING POLE TRIMMER 2. A WARNING: Read and understand this owner’s manual before operating Pole Trimmer. Make certain you read and understand all Safety Warnings on pages 2 and 3 of this manual. Improper use of this Pole Trimmer can result in severe injury or death from fire, electric shock, or body contact with moving parts. PIVOTING THE POWER HEAD The Pole Trimmer is equipped with a power head that pivots. The power head is able to pivot a full 180 degrees. The power head has a spring-loaded T-handle that allows it to be locked into several different positions within its 180-degree rotation. Before connecting the Pole Trimmer to the electrical supply, make sure the power head is locked into position. Do this by trying to rotate the power head in either direction. The power head should be locked in position and should not rotate. To pivot the power head, follow the instructions below. 1. Pull out on the T-handle located on the side of the pivot bracket. The T-handle is spring-loaded, so you will feel some resistance when pulling it out. Grasp the power head motor housing an...