Оценок - 4, средний балл: 3
(
)
)
|
Фрагмент инструкции
See instructions in the “Personal protective equipment” section. S Never use a machine that is faulty. Carry out the checks, maintenance and service instructions described in this manual. Some maintenance and service measures must be carried out by trained and qualified specialists. See instructions in the “Maintenance” section. S All covers and guards must be fitted before starting. Make sure the spark plug cap and HT lead are not damaged. Otherwise you could get an electric shock. S The machine operator must ensure that no people or animals come closer than 50 feet (15 meters) while working. S Secure hair above shoulder length. Secure or remove loose clothing or clothing with loosely hanging ties, straps, tassels, etc. They can be caught in moving parts. S Being fully covered also helps protect you from debris and pieces of toxic plants thrown by spinning blade. S Keep handles free of oil and fuel. S Always keep the engine on the right hand side of your body. S Hold the unit firmly with both hands. S Keep blade below waist level and away from all parts of your body. Do not raise engine above your waist. S Keep all parts of your body away from muffler and spinning blade. Keep engine below waist level. A hot muffler can cause serious burns. S Keep firm footing and balance. Do not overreach or use from unstable surfaces such as ladders, trees, steep slopes, rooftops, etc. S Use only in daylight or good artificial light. S Use only for jobs explained in this manual. WARNING: Faulty cutting equipment may increase the risk of accidents. Personal protection S Always wear boots and other equipment described in the “Personal protective equipment” section. S Always wear working clothes and heavy- --duty long pants. S Never wear loose fitting clothes or jewelry. S Persons with long hair should (for personal safety) put their hair up. Safety instructions regarding the surroundings S Never allow children to use the machine. S Ensure no one comes closer than 50 feet (15 meters) when working. S Never allow anyone else to use the machine without first ensuring that they have understood the contents of the operator’s manual. Safety instructions before starting work S Inspect the working area. Remove any objects such as stones, broken glass, nails, steel wire, string, etc. that can be thrown or can wrap around the blade or blade guard. S Keep others at a safe distance. Children, animals, onlookers and helpers should stand outside of the safety zone of 50 feet (15 meters). Stop the machine immediately if anyone should approach. S Check the entire machine before starting work. Replace damaged parts. Check for fuel leakage and that all safety guards and covers are complete and fastened securely. Check all nuts and bolts. S Check the blade for cracks or any other damage. S Ensure the blade guard is mounted and not damaged. 8 SAFETY INSTRUCTIONS S Check that the blade and blade guard are correctly secured. S When adjusting the carburetor, make sure the blade is held against the ground and that no one is in the immediate vicinity. S Make sure the blade does not rotate when idling. S Make sure the handle and safety features are in order. Never use a machine that has parts missing or has been changed in relation to the specification. S Only use the machine for the purpose for which it was intended. Starting WARNING: When the engine is startedwiththe chokeineither the choke or start throttle positions the blade will start to rotate immediately. S Ensure that all of the engine covers and housings are properly fitted before the unit is started. S Never start or attempt to run the unit with the clutch, clutch drum, clutch cover, or driveshaft removed. S Never start the machine indoors. Exhaust fumes can be dangerous if inhaled. S Observe your surroundings and make sure that there is no risk of people or animals coming into contact with the cutting equipment. S See the “Starting and Stopping” section for complete instructions. Fuel safety S Always use a fuel container with an anti- -- spill valve. S Never refuel the machine while the engine is running. S Always stop the engine and let it cool for a few minutes before refueling. S Make sure there is plenty of ventilation when refueling or mixing fuel (gasoline and 2- --stroke oil). S Move the machine at least 10 feet (3 meters) from the refueling point before start ingit. Min.10ft. (3m) S Never start the machine: S If you have spilled fuel on it. Wipe off the spillage and allow remaining fuel to evaporate. S If you have spilled fuel on yourself or your clothes, change your clothes. Wash any part of your body that has come in contact with fuel. Use soap and water. S If the machine is leaking fuel. Check regularly for leaks from the fuel cap and fuel lines. S Avoid all skin contact with fuel. Fuel is a skin irritant and may even cause skin changes. WARNING: Take care when handling fuel. Bear in mind the risk of fire, explosion and inhaling fumes. Transporting and storage S Store and trans...