Оценок - 2, средний балл: 3
(
)
)
|
Фрагмент инструкции
3 Prepare recording of the associated components. 4 Press REC PAUSE. 5 Press U to start recording. • The recording in the reverse mode stops after completing recording in the .direction. Be sure to start recording from the .direction. • When the reverse mode is switched off, recording stops after having recorded onto one side of tape. Note: The side erasure tab is removed (refer to P.19) will not be recorded even though the reverse mode is swithed on. To record audio using Dolby NR The Dolby NR is used to record audio to reduce hiss noise when the tape is played back later. The Dolby NR includes type B for popular use and type C for even improved noise reduction effect. Press DOLBY NR so that either the B or C indicator lights up. DOLBY B NR DOLBY C NR (Indicator lit) (Indicator lit) Off (Canceled) • A tape recorded using Dolby NR should be played back using the Dolby NR of the same type as that used in recording. The audio quality will be affected if a different type is used in playback. 13 TD-EX90 CD synchronized recording CDs can be recorded with a simple, one-touch operation. By using the features of the CD player you can easily create an original tape of your favorite music. Be sure to make the Compu Link connection among the EX series components. 1 Load the tape for use in recording. Press 0 to open the tape tray, place a tape on it and press 0to close it. • It is not possible to record onto a cassette tape with the broken accidental erasure tab. Use a cassette the tab of which is not broken. • If you want to record music on both sides of tape continuously, switch the reverse mode on (see page 13). • If you want to use Dolby Noise Reduction, press DOLBY NR to select B or C (see page 13). 2 Prepare the CD player. Load CDs, press CD 1, 2 or 3 according to the disc you want to record, and press &/CANCEL of the CD player. This selects the playing CD. Now set the CD player to the program play mode, etc., as required. * Refer to the instruction manual of the CD player for the CD player operating procedures. 3 Press CD REC. The CD player and cassette deck start simultaneously and synchronized recording starts. • During recording, the CD source is selected automatically by the amplifier/tuner. • During recording, the amplifier/tuner’s input source cannot be changed even by pressing its INPUT. To stop recording: Press &/CANCEL of the CD player to stop recording. The cassette deck will stop after leaving a non-recorded blank of 4 seconds. If you want to stop recording immediately, press 7of the cassette deck. CD RECREC PAUSE 14 TD-EX90 MD synchronized recording Synchronized recording makes it possible to start cassette recording in synchronism with the playback of the MD recorder. Be sure to make the Compu Link connection among the EX series components. 1 Load the tape for use in recording. Press 0 to open the tape tray, place a tape on it and press 0to close it. • It is not possible to record onto a cassette tape with the broken accidental erasure tab. Use a cassette the tab of which is not broken. • If you want to record music on both sides of tape continuously, switch the reverse mode on (see page 13). • If you want to use Dolby Noise Reduction, press DOLBY NR to select B or C (see page 13). 2 Prepare the MD recorder. Load the MD to be played. Program MD tracks if required. * Refer to the instruction manual of the MD recorder for the MD recorder operating procedures. 3 Press REC PAUSE. REC PAUSE CD REC The cassette deck enters record-pause mode. /CANCEL 4 Press U/8 of the MD recorder. Synchronized recording starts. To stop recording: Press &/CANCEL of the MD recorder to stop recording. The cassette deck will stop after leaving a non-recorded blank of 4 seconds. If you want to stop recording immediately, press 7of the cassette deck. 15 TD-EX90 COMPU LINK COMPU LINK Linked Operation of the Other Optional components (Compu Link) The EX series components can be controlled under linked operation provided by the JVC’s Compu Link remote control system. Compu Link The world of single components, in which you purchase a cassette deck, CD player, amplifier and other components separately and enjoy your own composition, is an effective means for pursuit of high-quality reproduction. However, in terms of operability, the need of controlling components independently makes their control complicated and their linked operation impossible. Then, isn’t it possible to combine single components and control them as simply as an integrated audio system? The Compu Link remote control system is the response to such a requirement. The components in the JVC EX series are equipped with jacks named COMPU LINK-3 (COMPU LINK jacks). By connecting the COMPU LINK jacks of these components, they can be controlled simply with a systematized, linked operation. Compu Link connections Using Compu Link cables, connect the COMPU LINK jacks of EX series components. Connect so that the Compu Link cables can bridge all of the EX series components yo...