Оценок - 5, средний балл: 4.6
(
)
)
|
Фрагмент инструкции
KS-F525 To stop play and eject the cassette Press 0. Tape play stops and the cassette automatically ejects from the cassette compartment. The source changes to the previously selected one. If you change the source, tape play also stops (without ejecting the cassette this time). • You can also eject the cassette by pressing 0 while the unit is turned off. To fast-forward and rewind a tape Press . for more than 1 second to fast-forward the tape. When the tape reaches its end, the tape is reversed and playback starts from the beginning of the other side. Press 4 for more than 1 second to rewind the tape. When the tape reaches its end, playback of the same side starts. To stop fast forward or rewind at any position on the tape, press TAPE 23. Tape play starts from that position on the tape. Note: When the tape reaches its end while fast-forwarding, the tape direction will be changed automatically. 16 Prohibiting cassette ejection You can prohibit cassette ejection and can “lock” a cassette in the cassette compartment. Press and hold TAPE 23and 0 for more than 2 seconds. “NO EJECT” flashes on the display for about 5 seconds, and the cassette is “locked.” Finding the beginning of a tune Multi Music Scan allows you to automatically start playback from the beginning of a specified tune. You can specify up to 9 tunes ahead of or before the current tune. ENGLISH To cancel the prohibition and “unlock” the cassette, press and hold TAPE 23and 0 for more than 2 seconds again. “EJECT OK” flashes for about 5 seconds, and this time the cassette is “unlocked.” Note: If you press 0 while cassette ejection is prohibited, the cassette will not be ejected. During playback Specify how many tunes ahead of or before the current tune the one you want is located. Press . to locate a tune ahead of the current tune on the cassette. Press 4 to locate a tune before the current tune on the cassette. Each time you press the buttons, the number changes up to ±9. When the beginning of the specified tune is located, playback starts automatically. Notes: • While locating a specified tune: – If the tape is rewound to its beginning, playback starts from the beginning of that side. – If the tape is fast-forwarded to the end, it is reversed and played from the beginning of the other side. • In the following cases, the Multi Music Scan function may not operate correctly: – Tapes with tunes having long pianissimo passages (very quiet parts) or non-recorded portions between tunes. – Tapes with short non-recorded sections. – Tapes with high level of noise or humming between tunes. 17 ENGLISH Other convenient tape functions Skipping the blank portions on the tape You can skip blank portions between the tunes (Blank Skip). When this function is on, the unit skips blank portions of 15 seconds or more, fast-forwards to the next tune, then starts playing it. • See also “Changing the general settings (PSM)” on pages 23 and 24. 1 Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display. (PSM: see page 24.) 2 Press . or 4 to select “B. SKIP (blank skip).” 3 Turn the control dial clockwise to select “ON.” Now Blank Skip is activated. 4 Press SEL (select) to finish the setting. Playing the current tune repeatedly You can play the current tune repeatedly (Repeat Play). Press RPT while playing a tune you want to hear over again. Each time you press the button, Repeat Play turns on and off alternately. Lights up when Repeat Play is turned on. When the tune has been played, the tape is automatically rewound to the beginning of that tune and the same tune will be played again. To cancel Repeat Play, press RPT again so that the RPT indicator goes off. Note: In the following cases, Blank Skip and Repeat Play may not operate correctly: – Tapes with tunes having long pianissimo passages (very quiet parts) or non-recorded portions during tunes. – Tapes with short non-recorded sections. – Tapes with high level noise or humming between tunes. – Tapes with tunes recorded at low recording levels. To cancel Blank Skip, repeat the same procedure and select “OFF” in step 3 by turning the control dial counterclockwise. 18 SOUND ADJUSTMENTS Adjusting the sound You can adjust the sound characteristics to your preference. 1 Select the item you want to adjust. Each time you press the button, the adjustable items change as follows: KS-FX725R VOL LOUD BAS (bass) TRE (treble) FAD (fader) BAL (volume) (loudness) (balance) KS-F525 BAS TRE FAD (bass) (treble) (fader) VOL BAL (volume) (balance) 2 Adjust the level. To increase the level. To decrease the level. Note: Normally, the control dial works as the volume control. So you do not have to select “VOL” to adjust the volume level. Indication To do: Range BAS Adjust the bass. –06 (min.) | +06 (max.) TRE Adjust the treble. –06 (min.) | +06 (max.) FAD* Adjust the front and rear speakerbalance. R06 (Rear only) | F06 (Front only) BAL Adjust the left and right speakerbalance. L06 (Left only) | R06 ...
Эта инструкция также подходит к моделям:Магнитолы - KS-FX725R (1.08 mb)