Оценок - 4, средний балл: 4.5
(
)
)
|
Фрагмент инструкции
После этого вытрите корпус сухой тканью. Не используйте химикаты и химически обработанные очищающие ткани. Не беритесь за шнур влажными руками. СПЕЦИФИКАЦИЯ Питание Частотные диапазоны Выходная мощность Сопротивление динамиков Сопротивление наушников АС 230 В ~ 50 Гц; ОС12 В (С) х 8; ГМ1 64- 108 МГц; АМ 540 -1600 КГц; 1.2 Втх2 (ЯМЭ) 200 Вт (Р.М.Р.О.) 8 Ом 32 Ом СРОК СЛУЖБЫ МАГНИТОЛЫ НЕ МЕНЕЕ 3-Х ЛЕТ 16 О STOP/EJECT button (21) Press the STOP/EJECT button (21) to cancel a selection, i.e., press this button during cassette play to stop the tape. In stop mode, press the button to eject the cassette. PAUSE button (19) The PAUSE button (19) can be used to interrupt a Recording or Playback temporarily and is useful for editing the content of the recorded tracks. Press the button once to pause the recording, press the button again to continue the recording. Note: In Pause mode, the Cassette motor is still energized, therefore the feature should not be used for long periods of time. AUTOMATIC STOP The Cassette mechanism has a built-in automatic stop. During Playing/Recording, the unit will automatically stop when the end of the tape is detected. TO PLAY A CASSETTE TAPE 1. Open the cassette door by pressing the cassette STOP/EJECT button (21). 2. Insert a cassette with the exposed tape facing upwards and the full reel on the right (unit plays from right to left) into the guides on the inside of the cassette door. 3. Close the cassette door. 4. Set the FUNCTION switch (16) to the TAPE position. 5. Press the cassette PI_AYbutton (24) to start the tape playing. 6. Adjust the VOLUME CONTROL (18) to a comfortable listening level. 7. To stop the tape playing, press the STOP/EJECT button (21). Press the button again to open the cassette door and eject the tape. Note: During play, when the end of the tape is reached the PLAY button (24) will pop up and play will stop. To play the other side of the tape, remove the cassette, turn the cassette over so that the full reel is on the left, insert the cassette and press the PLAY button (24). CARE OF CASSETTE TAPES TO HELP AVOID TANGLES Loose tape may jam or get tangled in the cassette recorder. With a hexagonal pencil or a similar tool, gently turn the pencil to tighten the tape. If the spool feels tight when taking up slack tape as described above, this may be due to ridges on the spool of tape. Tight spools can lead to uneven playback speed or tape tangling. In most cases the ridges can be removed by fast winding the cassette from one end to the other and back again. Avoid the use of C120 tapes with this unit. PROTECTING RECORDINGS FROM BEING ERASED. To prevent recordings from being erased accidentally, break out the tab(s) with a screwdriver. When the edge with the exposed tape is facing away from you, the tab that protects the side that is uppermost is on your right. To record on a protected cassette, seal the open slots with adhesive tape. MAINTENANCE If the sound becomes muffled or in any case after every 15 hours of operation, clean the pinch roller, capstan, erase head and record / play head. Open the cassette door and use a cotton bud moistened with special tape head cleaning fluid. CAUTION Never touch any of the parts described above with a metal object. Do not insert a cassette until the cleaned parts are completely dry. AUTOMATIC LEVEL CONTROL (ALC) This set has the latest Automatic Level control circuitry, therefore, it is not necessary to adjust the Volume Control when recording. This circuit automatically records at the correct level and prevents over loading. 5 VT-34 61.qxd 11.03.03 17:14 Page 12 ~Q- ENGLISH Note: While recording you may adjust the VOLUME control (18) as you desire without affecting the recording operation. TO RECORD FROM THE BUILT-IN RADIO 1. Slide the FUNCTION switch (16) to the RADIO position and tune to the desired station. 2. Load a cassette into the cassette compartment, with the full reel on the left. 3. Press the cassette RECORD button (25) until it locks in the down position (PLAY button (24) is depressed at the same time) and recording will start. 4. To end the recording, press the cassette STOP/EJECT button (21). If this button is not pressed, the recording will stop automatically when the end of the tape is reached. 5. To listen to your recording, press the cassette REWIND button (23) until the start point of the recording is reached and then press the PLAY button (24). Use the VOLUME control (18) to adjust the playback level to your personal taste. Note: On each end of the tape, there is a tape leader and no recording will take place over this portion of the tape. If you wish recording to take place as soon as the RECORD button (25) is pressed, please ensure that the leader is winded past the record head. TO RECORD FROM A COMPACT DISC 1. Slide the FUNCTION switch (16) to the CD position. 2. Load a cassette into the cassette compartment with the full reel on the left. 3. Insert the ...