Оценок - 4, средний балл: 4 ( )

Производитель: Kenwood Размер: 278.05 kb Название файла: Язык инструкции:

They can deform the cassette. • Avoid using extremely long cassette tapes, such as 100-minute-long tapes. Such tapes are very thin, and can tangle easily around the pinch rollers or other parts inside the unit, causing unit failure. • Remove a cassette tape from the unit when not listening to it for a whilst. If you leave a tape in the unit too long, it may stick to the tape head and cause unit malfunction. — 4— Basic operations Tuner features Tuner features Buttons u d SRC/ PWR OFF 4 .. SRC 4 .. MW/LW MENU LOUD MW/ LW MENU LOUD ATT FM AM LOUD/ MENU # 1- 6 FM AM MENU ST indicater Frequency MONO indicatorATT indicator LOUD indicator Band display LO.S indicator Preset Station Number AUTO indicater — 5— English Buttons RDS features Cassette player MW/LW MENU LOUD SRC # 1- 6 MENU TI/ VOL ADJ AM FM . 4MW/LW MENU LOUD SRC 0T. C FF REW CLK TA indicator EON indicator TP indicator AF indicator TI indicator REG indicator NEWS indicatorPTY indicator Tape indicator T.C indicator — 6— Disc changer Other features Disc changer Other features Function of the KRC-SRC/ DISC– SRC DISC+ 4 .. AUD PWR OFF 4 .. MW/ LW MENU LOUD ud AM FM MENU CLK MW/ LW MENU LOUD M. RDM D. SCN REP RDM SCN DISP NAME SET Track number Track time Disc number Disc indicatorREP indicator SCN indicator RDM indicator Clock display — 7— English Basic operations (See page 5) Power Volume Turning on the power: Increasing Volume: Press the SRC button. Press the ubutton to turn up the NOTE Decreasing Volume: Press the dbutton to turn down the volume. Turn the power on before carrying Turning off the power: Hold down the PWR OFF button Selecting the standby mode: Attenuator This function allows you to turn down Press the SRC button repeatedly to select . When "ALL OFF" is displayed, the standby Turning Attenuator On/Off: The standby mode turns all functions off although Press the ATT button to switch the attenuator unit’s power on. Use this mode when you want When the attenuator is on, the ATT indicator blinks. display illuminated but do not want to listen to anything. When the attenuator is off, the volume returns to level. NOTE The AF function can be turned on or off even when the standby NOTE Turning down the volume all the way turns off the attenuator mode has been turned on. If the power is on, the AF function function. tunes in to stations that offer good reception. Switching Modes Loudness Switching Modes: Each time you press the SRC button, the mode switches as follows: Disc changer mode t Tuner mode t Tape mode t t Standby mode NOTE The mode switches to the next mode from any mode which cannot be used. This function amplifies low and high tones when the volume is turned down. The LOUD indicator lights up, when the loudness function is on. Turning Loudness On/Off: Press the LOUD button to switch the loudness on and off. — 8— Menu System To accommodate has been employed Press the MENU button to enter the menu to make the setting. Details on each setting are separately in the corresponding 1 Hold down the MENU button for "MENU" is displayed when the menu The function that you can adjust is indicated settings displayed. 2 Selecting function to set Press the . button to search through the functions until you see the one you want to adjust in the display. Press the 4button to search through the functions backward. Example: If you want to switch the tuning mode from manual to automatic, first search through the functions until you see "MANUAL" in the display. 3 Changing setting for currently displayed function Press either the AM or FM button. The setting will change for each function. Example: The tuning mode will switch from manual to auto matic, and "AUTO" is displayed. With the programme type function and the auto memory function, the function will start to activate. NOTE To use the auto memory function, hold down either the AM or FM button for two seconds or more. 4 Ending the menu mode Press the MENU button. Function Varieties of settings each function (display) . (KRC-259R/21R/159RA,RG) Disabled System Indicator DSI ON « DSI OFF ­. (KRC-259R/21R) Selectable Illumination COL GRN « COL AMB ­. News Bulletin Function NEWS 00M « NEWS OFF ­. Local seek LO.S ON « LO.S OFF ­. Selecting Tuning Mode AUTO « MANUAL ­. Auto Memory Entry A-MEMORY (start) ­. *AF Function AF ON « AF OFF ­. *Region Restrict Function REG ON « REG OFF ­. *Auto TP Seek ATPS ON « ATPS OFF ­. *Monaural Reception MONO ON « MONO OFF ­. *Programme Type PTY (PTY mode entered) ­ NOTE • Make sure to end the menu mode when finished. If you fail to end the menu mode, several func...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: