Оценок - , средний балл: ( )

Инструкция по эксплуатации Pioneer, модель S-EV1000V

Производитель: Pioneer
Размер: 1.33 mb
Название файла: xrb3053a.pdf

Язык инструкции:

Документ загружается, подождите пожалуйста

Скачать инструкциюЗакрыть

Документ загружается, подождите пожалуйста

Скачать инструкциюЗакрыть

1 Gently ease the grille loose by gripping the bottom and pulling towards you. 2 Pull the top free in the same way. When reattaching, start from the top then push the bottom in until secure. • It is not recommended (due to dirt and dust) to leave the speaker grilles removed. • Since the speaker grilles may come loose, make sure to place the speakers in a location where they will not cause injury. English FrancaisDeutsch NederlandsItaliano Espanol Note 1 If you choose to use the Front surround 3-spot setup (as explained in Home theater sound setup on page 23), it is necessary to use the speaker stands provided (do not attach the pads to the base of the surround speakers). Using the speaker stands for the Standard surround 5-spot setup is optional. See Attaching the surround speakers to the speaker stands on page 10 for more on this. En Connecting up Connecting up Chapter 2 Connecting up Important • Before making or changing any connections, switch off the power and unplug the power cord from the AC outlet. • When making cable connections, make sure not to bend the cables over the top of this unit. This may cause a humming noise from the speakers. Connecting the speaker terminals Connect the wires from the speakers to the terminals on the main unit rear panel as shown below. Before connecting, you may want to consider the placement options available in your room, and when using this system:1 • EV500 model only – Place the front left and right speakers at equal distances from the TV, then connect them as shown below. See Optional surround speaker connections on page 10 to connect surround speakers. • EV700/1000 model only – A color-coded system is provided for speaker connections (see Multichannel speaker connections below). See Home theater sound setup on page 23 for surround placement options. Caution • Do not connect this speaker to any amplifier other than the one supplied with this system. Connection to any other amplifier may result in a malfunction or fire. • Make sure that the bare speaker wires cannot touch each other, or come into contact with other metal parts once the unit is switched on. 1 Twist and pull off the protective shields on each wire. 2 Connect to the speaker terminals on the rear of the unit. Make sure to insert the red/colored wire into the red/colored (+) tab and the black/white wire into the black (–) tab. 3 EV 1000 only: Connect to the terminals on the rear of the subwoofer and front speakers in the same way. Note 1• The speakers supplied with this system are magnetically shielded. However, placing them extremely close to a television may result in color distortion on the screen. If this happens, move the speakers a little further away and switch off the television for 15–30 minutes. En Connecting up Connecting up 02 Multichannel speaker connections EV700/1000 model only Connect each speaker using the color-coded speaker cable. Match them to the colored labels above the speaker terminals (see illustration below). *This connection is required only for the EV1000 model. Hints on speaker placement The following guidelines will help you to get the Caution SPEAKERS L L R R SURROUND FRONT CENTER SUB WOOFER Front right* Surround right Surround left Front left* Subwoofer* Center Gray Blue WhiteRed Purple Green EV700/1000DVD best performance from your speaker system. • If you choose to install the center speaker See Home theater sound setup on page 23 for on top of the TV, be sure to secure it with surround placement options with this system. putty, or by other suitable means, to reduce the risk of damage or injury resulting from • Place the front left and right speakers at the speaker falling from the TV in the event equal distances from the TV. of external shocks such as earthquakes. • Place the center speaker above or below • If possible, place the surround speakers the TV so that the sound of the center slightly above ear level. channel is localized at the TV screen. English FrancaisDeutsch NederlandsItaliano Espanol En 02 Connecting up • Try not to place the surround speakers further away from the listening position than the front and center speakers. Doing so can weaken the surround sound effect. • Be sure all speakers are installed securely to prevent accidents and improve sound quality. Attaching the surround speakers to the speaker stands EV700/1000 model only If you have set up your system using the Front surround 3-spot setup (as explained in Home theater sound setup on page 23), it is necessary to use the speaker stands provided. Using the speaker stands for the Standard surround 5spot setup is optional. Attach each speaker as shown in the steps below. 1 Line up the spurs on the speaker stand with the holes on the back of the surround speaker and press into place. 2 With the spurs fixed in place, pull the speaker downward to secure it on the stand. 1 2 Optional surround speaker connections EV500 model only Using RCA speaker cables, you can connect surround speakers to the left an...