Оценок - 4, средний балл: 3.8
(
)
)
|
Фото и характеристики Pioneer KEH-P4020R |
Фрагмент инструкции
Playing a CD 12 3 You can use this unit to control a multi-CD player, which is sold separately. 1 TRACK NUMBER indicator Shows the track currently playing. 2 PLAY TIME indicator Shows the elapsed playing time of the current track. 3 DISC NUMBER indicator Shows the disc currently playing. 13 En Multi-CD Player 1 Press SOURCE to select the multi-CD player. 2Use VOLUME to adjust the sound level. When you press VOLUME up/+, the volume is raised and when pressed down/–, the volume is lowered. 3 Select a disc you want to listen to with the 1 to 6 buttons. For discs located at 1 to 6, press the corresponding number button. If you want to select a disc located at 7 to 12, press and hold the corresponding numbers such as 1 for disc 7, until the disc number appears in the display. • You can also sequentially select a disc by pressing 5/.. 4 To perform fast forward or reverse, press and hold 2 or 3. 5 To skip back or forward to another track, press 2 or 3. Pressing 3 skips to the start of the next track. Pressing 2 once skips to the start of the current track. Pressing again will skip to the previous track. Notes • When the multi-CD player performs the preparatory operations, READY is displayed. • If the multi-CD player does not operate properly, an error message such as ERROR-14 may be displayed. Refer to the multi-CD player owner’s manual. • If there are no discs in the multi-CD player magazine, NO DISC is displayed. 50-disc multi-CD player Only those functions described in this manual are supported for 50-disc multi-CD players. Repeating play There are three repeat play ranges for the multi- CD player: Multi-CD player repeat, one-track repeat, and disc repeat. Press REPEAT/RANDOM to select the repeat range. Press REPEAT/RANDOM until the desired repeat range appears in the display. • Nothing’s displayed — Repeat all discs in the multi-CD player • RPT — Repeat just the current track • DISC — Repeat the current disc Notes • If you select other discs during repeat play, the repeat play range changes to multi-CD player repeat. • If you perform track search or fast forward/reverse during RPT (one-track repeat), the repeat play range changes to DISC (disc repeat). English En 14 Multi-CD Player Playing tracks in a random order Random play lets you play back tracks in a random order within the repeat range, multi-CD player repeat and disc repeat. 1 Select the repeat range. Refer to Repeating play on page 14. 2 Press and hold REPEAT/RANDOM for about two seconds to turn random play on. DRDM(random playing in a disc) or RDM(random playing in a magazine) appears in the display. Tracks will play in a random order within the previously selected multi-CD player repeat or disc repeat ranges. 3 Press and hold REPEAT/RANDOM for about two seconds to turn random play off. Tracks will continue to play in order. Scanning CDs and tracks While you are using DISC (disc repeat), the beginning of each track on the selected disc plays for about 10 seconds. When you are using multi-CD player repeat, the beginning of the first track of each disc is played for about 10 seconds. 1 Select the repeat range. Refer to Repeating play on page 14. 2 Press and hold PAUSE/SCAN for about two seconds to turn scan play on. DSCN (scanning tracks) or SCAN (scanning discs) appears in the display. The first 10 seconds of each track of the present disc (or the first track of each disc) is played. 3 When you find the desired track (or disc) press and hold PAUSE/SCAN for about two seconds to turn scan play off. The track (or disc) will continue to play. Note • After track or disc scanning is finished, normal playback of the tracks will begin again. Pausing CD playback Pause lets you temporarily stop playback of the CD. 1 Press PAUSE/SCAN to turn pause on. PAUSE appears in the display. Play of the current track pauses. 2 Press PAUSE/SCAN to turn pause off. Play will resume at the same point that you turned pause on. 15 En Audio Adjustments Introduction of audio adjustments 12 1 AUDIO display Shows the audio adjustments status. 2 LOUD indicator Appears in the display when loudness is turned on. Press AUDIO to display the audio function names. Press AUDIO repeatedly to switch between the following audio functions: FAD (balance adjustment)—EQ-L (equalizer)— LOUD (loudness)—FIE (front image enhancer)—SLA (source level adjustment) • When selecting the FM tuner as the source, you cannot switch to SLA. • To return to the display of each source, press BAND. Note • If you do not operate the audio function within about 30 seconds, the display is automatically returned to the source display. Using balance adjustment You can select a fader/balance setting that provides an ideal listening environment in all occupied seats. 1 Press AUDIO to select FAD. Press AUDIO until FAD appears in the display. • If the balance setting has been previously adjusted, BAL will be displayed. 2 Press 5 or . to adjust front/rear speaker balance. Each press of 5 or . moves the front/rear speaker balan...
Эта инструкция также подходит к моделям:Магнитолы - KEH-P4023R (568.24 kb)