Войти:
Оценок - 4, средний балл: 3.3 ( )

Инструкция по эксплуатации Jensen, модель VR180

Производитель: Jensen
Размер: 3.25 mb
Название файла: 45450892-06b5-4943-b1cf-49ad23d3318a.pdf
Язык инструкции:en
Перейти к скачиванию



Фрагмент инструкции


When inserted, the CD will play automatically. 16. Eject button for Cassette Eject Cassette 17. Fast rewind button 18. Fast forward button 19. Cassette Slot Important notes Operating the radio while driving can be dangerous. Traffic conditions can demand the constant attention of the vehicle operator.. Warning Please concentrate on your driving above all! Operating Instructions -4- OPERATING INSTRUCTIONS 1. PWR button Press the button to turn on or off radio. 2. Rotary / Push knob The knob serves: - Sound setting - Volume control - Clock control Sound setting Press the button repeatedly to select Treble setting (TRE) Bass setting (BAS) Balance setting (BAL) Fader setting (FAD) Volume Control Turn the knob to the desired position. Clockwise: Increase volume Counterclockwise: Decrease volume Note: Please adjust volume in moderate position so you can hear traffic sounds. Clock control With the time displayed, select any one: HOUR MINUTE The scale value in the display can be set by turning the knob. ( s- ee 6) Sound setting Press the knob to select TRE/BAS setting —Set the required value by turning the button to the left or right. Bass: +7 0 -7 Treble: +7 0 -7 Balance control Fader control Maximum for left medium Maximum for right Balance BAL LEFT 9 BAL CENTER BAL RIGHT 9 -5- OPERATING INSTRUCTIONS Maximum for front medium Maximum for rear Fader FAD FR0NT9 FAD CENTER FAD REAR 9 Reset If no alterations are made for 5 seconds, the system will automatically leave the menu and store the last setting. 3. Auto-seek tuning button Radio operation seek tuning It is possible to seek tuning backwards and forwards by pressing either the up or the down hand side of the switch. Search station in the direction selected in both AM and FM mode. CD/CDC operation Search track Select track up/down in the direction selected by briefly pressing t-he switch. Fast forward and reverse .The switch is used for audibl-e fast forward and reverse of a track during CD/CDC operation by pressing the switch for more than 2 seconds. 4. Mute and DSP button Mute function () Radio operation: The radio enters into mute state by pressing the up of the rock switch (volume for 0, "MUTE" displaying); Press a-gain, return to the normal play state. Tape operation: Press the up of the rock switch; current play pause; the word "PAUSE" appears in the display. Press again to cancel PAUSE function. Cassette play from the pause position. Changing the mode in pause state can cancel the state. CD/CDC operation: in CD play state, press the button to pause play and the word "PAUSE" appears in the display. Press again to c-ancel PAUSE function. CD play from the pause position. Changing mode in pause state can cancel the state. DSP function OPERATING INSTRUCTIONS Press the down of the rock switch to select the following in turn: FLAT-JAZZ-POP-CLASS-ROCK-VOCAL-DSP Off 5. Manual Setting Manual tuning Briefly press the button and start to tune in the required direction. D-uring tuning, sound is muted. Hold the button, tuning changes rapidly in the required direction. CDC operation: Disc selection Select disc forward or reward in the desired direction. 6. AMS and T/F button Preset scan / Auto Store station Preset scan Briefly pressing can scan preset station rang 1 to 6 in desired band. Auto-store station Hold button down and the 6 stations with the strongest signals can be stored automatically in the desired band. If less than 6 stations, other settings don't change. Or if no station found, the radio automatically t-unes to the former station. Frequency/Time Briefly press button to alter between frequency and clock. In time state, hold button down and the hour digit flashes. The hour digit can be adjusted by turning the knob(2); Press again, minute can be adjusted as w-ell. If no alternation within 5 seconds, radio exits the time state. 7. Preset button 1 The button serves : -Store station and Play stored station -In CDC mode, repeat track or disc play. -In CD mode, repeat track play Store station -Select desired waveband -7- OPERATING INSTRUCTIONS -Tune radio to desired station. -Press the button for approximately 2 seconds and when the word "M1"appears in the display, the station has be stored. Other preset buttons appear relevant words, such as M2... Note: When the new station stored, the old station stored can be r-eplaced. Play preset station -Select desired waveband -Briefly press button and emit the stored station. -The band , frequency and preset digit appear in the display. CD/CDC repeat play -In CD/CDC mode, briefly press button, repeat current track to play. -In CDC mode, press long for approximately 2 seconds, and repeat the track of current disc to play. -Press again to cancel the function of repeating play. 8. Preset button 2 The button serves: -Store station and Play stored station -Scan play in CD/CDC mode Store station/ Play stored station , repeat the steps as 7 CD...


Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории