Оценок - 2, средний балл: 4.5
(
)
)
|
Фрагмент инструкции
To resume playing, press the CD PLAY/PAUSE Button (# 12) again. 7. You can choose to play your favorite track directly by pressing either the Skip Forward Button (# 19) or Skip Backward Button (# 20). The LED Display (# 23) will indicate the correct track number selected. 8. To locate a particular passage within a track, keep the CD Search Forward Button (# 19) or CD Search Backward Button (# 20) depressed until it is found. 9. To repeat a particular track, press the CD REPEAT Button (#13) until the CD Repeat 1/All Indicator (# 24) flashes. 10. To repeat the entire CD, ,,, press the CD Repeat Button (#13) until the CD Repeat 1/All Indicator (# 24) lights steadily. 11. To stop playing, press the CD STOP ¦Button (#14). 12. When you wish to turn off the CD Player, set the Function Selector (# 27) to the "TAPE" position. The POWER Indicator (# 22) will go off. CD PROGRAMMED PLAY This function allows the tracks to be played in a programmed sequence. NOTE: Program can only be set in STOP mode. 1. In CD stop mode, press the PROGRAM Button (# 18) once. Program No. “01” will appear and blink in the LED Display (#13). 2. Press the CD Skip Forward Button (# 19) or CD Skip Backward Button (# 20) to select the song to be programmed. For example track 5 is selected. - EN 9 3. Press the PROGRAM Button (#9) again to store selection. The LED Display (#13) will go to “02” and blink to prompt for input. 4. Press the CD Skip Forward Button (# 19) or CD Skip Backward Button (# 20) to select the next song to be programmed and press the CD PROGRAM Button (# 18) to store the second selection. 5. You may repeat steps #2 - #4 to program as many as 20 tracks. The programmed tracks will be shown in the LED Display (# 23) one by one in the programmed sequence after the 20th selection has been stored. 6. To check the programmed tracks, press the PROGRAM Button (# 18) repeatedly until the last Program No. appears and flashes in the Display and then press the PROGRAM Button (# 18) once again. The programmed tracks will be displayed one by one in the programmed sequence. 7. Press the CD PLAY/PAUSE Button (#12) to start playing in the programmed sequence. • After all the programmed tracks have been played the player stops but the program remains in the memory. • Press the PLAY/PAUSE Button (#12) to begin programmed playback again. 8. To cancel programmed play, press the CD STOP ¦ Button (#14). CASSETTE RECORDER OPERATION 1. Open the Cassette Door and insert a pre-recorded cassette tape with the exposed tape facing upwards. Close the Cassette Door. 2. Press the Cassette Play Button (# 6) to start playback and adjust the Rotary Volume Control (# 1) to obtain the desired sound level. 3. Press the Cassette Fast Forward Button (# 7) or the Cassette Rewind Button (# 8) to rapidly advance or rewind the tape. 4. Press the Cassette Record Button (# 9) to record either from the Radio, AUX IN or CD. Use the Function Selector (# 27) to choose your signal source accordingly. 5. Press the Cassette Stop Button (# 5) to stop operation. AUTOMATIC STOP To protect your cassette tapes and prevent unnecessary wear to the pinch roller of the cassette mechanism, this unit is equipped with an Automatic Stop System. When the tape ends during play, the Cassette Play Button (# 6) will automatically release to stop the cassette from running. CASSETTE TAPE OPERATING TIPS 1. High quality tapes are recommended to obtain maximum quality reproduction from recordings. 2. Tapes with playing time of 120 minutes (C-120) are not recommended because they contain thinner and longer tape that has a greater chance to malfunction and jam, which may damage the cassette mechanism. 3. To obtain good reproduction, the head should be cleaned after every 10 to 20 hours of use. It is also recommended that the cassette be kept away from excessive heat or cold. - EN 10 4. If there is slack in the tape, remove the slack prior to inserting the cassette. To remove the slack, insert a pencil into the hub and rotate clockwise as shown below: 5. A leader tape is provided at the beginning on each cassette. There is no recording on this area, so it is necessary to let the tape run for about five seconds to clear the head. 6. Keep the tape head clean since a dirty head can cause distorted sound or improper tape speed. Depress the Cassette Play Button (# 6) and use a small cotton swab with tape head cleaner or alcohol to clean the tape head, capstan and pinch roller as shown below: AUX IN OPERATION You can play other music sources (MP3 or other digital audio players) through the speakers of this player by connecting the AUX IN Jack (# 30) to your external player’s audio out jack or headphone jack. 1. Plug one end of an audio cable (not included) into the AUX IN Jack (# 30) and the other end of the cable to the headphone jack of your digital audio player. 2. Set the Function Selector (# 27) to “AUX/MP3 IN”. 3. Start playing the device you plugged into the AUX IN jack. 4. Slowly adjust both the volume c...