Оценок - 3, средний балл: 4
(
)
)
|
Фрагмент инструкции
The aerial can be directed by turning the whole set. - For Short Wave (SW), the telescopic aerial must be pulled out and placed in the vertical position. To improve SW-reception, vary the length of the aerial. • When FM STEREO lights up, you are receiving a FM-stereo station. If the FM-stereo signal gets weak, FM STEREO goes out and you will hear (and record) the FM programme in mono. • The set is switched off if the TAPE/RADIO selector is in position TAPE and the recorder buttons are released. CASSETTE RECORDER_ Copyright Recording is permissible insofar as copyright or other rights of third parties are not infringed. Fast winding and rewinding Press fast forward wind F.FWD •*< or REWIND ►► button. To stop, press STOP ■. Safeguarding a cassette against erasure Keep the cassette side to be safeguarded in front of you and break out the left tab. Now, recording on this side is no longer possible. RECORDING_ • Press EJECT ■ to open the cassette holder. • Insert the cassette. • For recording you must use a NORMAL cassette (IEC I) on which the tabs are not removed. - At the very beginning of the tape, no recording will take place during the first 7 seconds when the leader tape passes the recorder heads. • When monitoring during recording, adjust the sound with the controls VOLUME and TONE. These controls do not affect the recording. Recording from the radio • Set the TAPE/RADIO selector to RADIO. • If during the recording of a AM/MW or LW station, a whistling sound is heard, this sound can be suppressed by setting the BEAT CUT switch to another position. Microphone recording • Set the TAPE/RADIO selector to TAPE. • Set the VOLUME control to zero (during microphone recordings, monitoring is not possible). Starting and stopping the recording • To start recording, press RECORD •; in doing so, PLAY «is pressed too. • For brief interruptions, press PAUSE II. Press again to restart recording. • To stop, press STOP ■. On pressing again, the cassette holder will open (EJECT). - When the end of the tape is reached, the recorder buttons are released. • The set is switched off if TAPE/RADIO selector is in position TAPE and the recorder buttons are released. CASSETTE PLAYBACK_ • Set the TAPE/RADIO selector to TAPE. • Press EJECT ■ and insert a cassette. - For playback, any cassette type can be inserted. • To start playback, press PLAY < • Adjust the sound with the controls VOLUME and TONE. - You may connect stereo headphones with 3.5 mm plug to socket i!. The loudspeakers are then muted. • To stop, press STOP ■. The set is then switched off. On pressing again, the cassette holder will open (EJECT). When the end of the tape is reached, the recorder buttons are released. 6 General Troubleshooting MAINTENANCE_ Clean the parts indicated after every 50 hours of operation or, on average, once a month. • Open the cassette holder by pressing EJECT«. • Use a cotton bud slightly moistened with alcohol or a special head cleaning fluid. • Press PLAY «and clean the rubber pressure roller (d). • Then press PAUSE u and clean the capstan ©, recording/playback head (§) and erase head (Â). • After cleaning, press STOP ■. Cleaning of the heads ® and (f) can also be done by playing a cleaning cassette through once. Do not expose the set, batteries and cassettes to rain, moisture, sand, or to excessive heat e.g. from heating equipment or in motor cars parked in the sun. RECYCLING_ Please observe the local regulations regarding the disposal of packing materials, exhausted batteries and old equipment. • All redundant packaging material has been omitted. We have done our utmost to make the packaging easy separable into three mono-materials: - cardboard (box) - expandable polystyrene (buffer) - polyethylene (bags, protective foam sheet) • Your set consists of materials which can be recycled if disassembled by a specialized company. • Do not dispose of exhausted batteries with your household waste. The model number and production number are located on the base of the set. This product complies with the radio interference requirements of the European Community. If a fault occurs, first check the points listed below before taking the set for repair. If you are unable to remedy a problem by following these hints, consult your dealer or service centre. Warning: Under no circomstances should you try to repair the set yourself, as this would invalidate the guarantee PROBLEM_ - POSSIBLE CAUSE • REMEDY No sound_ - VOLUME is not adjusted • Adjust the VOLUME - Headphones are connected • Disconnect the headphones - Batteries are exhausted • Insert fresh batteries - Batteries are incorrectly inserted • Insert the batteries correctly - Mains lead is not securely connected • Connect the mains lead properly Broadcast cannot be received_ - Insufficient antenna input • Rotate telescopic antenna (FM) or set (AM) for best reception poor radio reception_ - Weak radio aerial signal • Ai...
качественный звук