Оценок - 2, средний балл: 3.5
(
)
)
|
Фрагмент инструкции
(Adjustment range: -6 to +6) 4. Do not oil the cassette mechanism. 5. Always remove the cassette from the mechanism when not in use. Exposure to direct sunlight, extreme temperatures or high humidity may damage cassettes. 3) When the adjustment is complete, press A-M button [4] several times until the function mode is reached. Adjusting the Treble 1) Press A-M button 0 and select ‘TREB”. 2) Turning the Rotary knob [3] clockwise emphasizes the treble; turning it counterclockwise attenuates the treble. * The factory default setting is “0”. (Adjustment range: -6 to +6) 3) When the adjustment is complete, press A-M button 0 several times until the function mode is reached. Adjusting the Balance 1) Press A-M button 0 and select “BAL”. 2) Turning the Rotary knob 0 clockwise emphasizes the sound from the right speaker; turning it counterclockwise emphasizes the sound from the left speaker. *The factory default setting is “0”. (Adjustment range: L9 to R9) 3) When the adjustment is complete, press A-M button 0 several times until the function mode is reached. 5. OPERATION Note: • Be sure to read this chapter referring to the front diagrams of chapter 2. CONTROLS on page 3 (unfold). 4 AB230 Adjusting the Fader 1) Press A-M button [4] and select “FAD”. 2) Turning the Rotary knob clockwise emphasizes the sound from the front speakers; turning it counterclockwise emphasizes the sound from the rear speakers. * The factory default setting is “0”. (Adjustment range: F9 to R9) 3) When the adjustment is complete, press A-M button 0 several times until the function mode is reached. Setting the Z-enhancer This unit comes with three types of sound tone effects stored in memory. Select the one you prefer. • The factory default setting is “Z-EHCR OFF’. Each time you press Z-EHCR button \j\, the tone effect changes in the following order. “Z-ENHANCER 1” “Z-ENHANCER 2” -* “Z-ENHANCER 3” -*■ “Z-EHCR OFF” “Z-ENHANCER 1”... • Z-ENHANCER 1: bass emphasized • Z-ENHANCER 2: treble emphasized • Z-ENHANCER 3: bass and treble emphasized • Z-EHCR OFF: no sound effect Switching the Display While pressing the BAND button Q[j press the DISP button EU to enter the clock display mode. Main display -*■ Clock display -» Main display Setting the Clock 1) While pressing the BAND button E, press the DISP button p to enter the clock display mode. 2) While pressing the BAND button [|], press and hold the DISP button 03] for 2 seconds or more. This enables the clock editing mode. *The editable fields will be indicated when the display flashes. 3) To move between the hour and minute fields, use the Up (hour) and Down (minute) buttons [1]. 4) To store the clock setting, press the BAND button [§]. Notes: • If you select another operation mode before completing the above procedure, the clock setting operation will be canceled. • Removing the vehicle’s battery for a check or repair will cause the clock to reset to 1:00. Set the clock again if this happens. Tape Operation Loading Tapes Insert the cassette tape into the Cassette insertion slot with the side on which the tape is exposed facing the right. Playback starts automatically. * When the end of the cassette tape is reached, the auto reverse mechanism is activated and the other side of the tape begins playing automatically. Note: * Fully insert the cassette tape into the cassette insertion slot. Listening to a tape which is already loaded Press the POWER button QD to select the tape mode. Playback begins automatically. Ejecting Cassette Tapes Press the Eject button ¡j]. The cassette tape is ejected. Fast-Forwarding and Rewinding Use the FF button 01 and REW buttons QoJ. ►►: Press this to fast-forward the tape. «: Press this to rewind the tape. * It is possible to listen to the radio during fast-forward, rewind or search operations. Switching to the Other Side of the Tape Press the PROG button 01] both the FF button 01 and REW button 03 together at the same time. Playback is switched automatically to the other side of the cassette tape. АВНЗО 5 Radio Operation FM Reception For enhanced FM performance the MfiGI-TUNE tuner includes signal actuated stereo control and Multipath noise reduction circuits. Listening to the Radio 1) Press the POWER button [1] to select the radio mode. The radio turns on. 2) To tune to a desired preset station, first press the BAND button H] and select FM1, FM2, FM3, FM4 or AM. The band changes as follows each time the BAND button is pressed: FM1 -*• FM2 -* FM3 -* FM4 AM FM1 3) Use the corresponding Preset buttons 51] to select the desired station. Seek Tuning 1) Press the BAND button [1] and select the desired band. 2) Press the Up or Down buttons Q] to seek Up or Down the frequency band. Seek tuning automatically stops when a station is found. Manual Tuning 1) Press the BAND button [U to select the desired band. 2) Press and hold the BAND button for more than 2 seconds. “MANU” turns on and the manual tuni...