Оценок - 4, средний балл: 3.8
(
)
)
|
Фрагмент инструкции
Part No. 54-5070-02 Printed in Korea. 9909 Description The Bogen Model CR100A is a compact, integrated unit consisting of an auto- reversing cassette tape player and a FM-stereo/AM tuner*. The CR100A provides an economical source of background music for Bogen sound systems.The CR100A features: .. Electronic quartz-locked PLL tuning system .. Built-in stereo .. 4 Selectable Bands (FM1,FM2,FM3,AM),with each band consisting of up to 6 stations .. Automatic Seek Control .. Auto Store/Preset Station Scanning .. LCD Digital Display The CR100A operates on 120 volts, 60Hz AC. It incorporates a low-level, 600ohm output, which will drive the auxiliary input of a public address amplifier. The unit can also drive 8-ohm loudspeakers directly with its internal stereo amplifier (one watt per channel). If desired, the CR100A may be mounted in a standard 19-inch equipment rack by means of the optional RK78 Rack Panel Kit. * Note: MW is the international designation for AM See Page 6 to Connect Antenna 2-Channel Output to Drive 8-Ohm Speakers CR100A REAR VIEW To 120V, 60Hz AC 600-Ohm Output to Drive AUX Input of Amplifier 2 Controls and Functions 2 3 4 5 7 813 6 1 911 12 14 15 10 CR100A FRONT VIEW Operating Instructions 1.On/Off Switch and Volume Control - To turn the unit on, rotate the knob clockwise until an audible click is heard. Further clockwise rotation will increase the volume level. 2. Balance Control - Move the slider control to obtain the most desirable stereo effect. To increase the sound level in the right speaker, move the slider control to the right. To increase the sound level in the left speaker, move the slider control to the left. 3. Tone Control - To increase the tone, move the slider control to the right. To decrease the tone, move the slider control to the left. 4. Rewind Button - To rewind, push the button marked ..... To stop rewinding, press the button again. 5. Fast Forward Button - To fast forward, press the button marked .....To stop fast forwarding, press the button again. 6.Tape Program Selector - During cassette play, press the Fast Forward (....) and Rewind (....) buttons simultaneously and the reverse side of the tape will automatically play. 3 7. Eject Button -Press this button to eject the cassette tape. 8. Cassette Tape Door - Insert a cassette tape sideways with the tape side facing toward the right. 9. Digital Display -The display indicates station frequency and other functions. 10. Band Button -Each time the BAND switch is pressed, the radio frequency band will be switched in the following sequence: FM1, FM2, FM3,AM and then it will repeat the sequence. 11. Manual Tuning Button - Press the UP (+) side to tune into a higher frequency and press the DOWN (-) side to tune into a lower frequency. The frequency the unit is tuned to will be indicated by the Digital Display. The frequency will change continuously by keeping one of the buttons pressed down. 12. Seek Button -Automatic tuning is possible by pressing this button. Having selected the desired band, press the button to search for and tune in stations broadcasting at a higher frequency. 13. Preset Button (1,2,3,4,5,6) - It is possible to program up to six stations each on the FM1, FM2, FM3, and AM bands. Each preset switch has two functions, depending on how long it is pressed. • To recall a preset station, press the preset switch for less than two seconds. • To put the tuned in station into memory, press the preset switch for more than two seconds. 14. P.SCAN (Auto Memory) Button - The P.SCAN switch has two functions, depending upon how long it is pressed. 1) Pressing the P.SCAN switch for less than two seconds, the radio will automatically tune to the next preset channel, pause for five seconds, and repeat. This process will continue until the P.SCAN button is pressed again. 2) Pressing the P.SCAN switch for more than two seconds, the radio will automatically tune and store radio stations into each of the preset channels. • While pressing the P.SCAN switch, the output is muted. • By keeping the P.SCAN switch pressed for more than two seconds, the next preset channel is displayed on the channel indicator and the displayed frequency will increase. • Up to six stations are preset using channels 1 to 6. • When P.SCAN presetting is completed, the unit will tune in the station stored into channel 1. 15. MO/ST Button -Press the switch so the ST indicator lights to receive stereo programs. In case there is disturbing noise during a stereo broadcast or the broadcast is received under bad conditions, press the MO/ST button again (the ST indicator light goes out) to listen to the program in MONO. 4 Operations RADIO OPERATION 1. Turn the unit on by turning the Volume control knob clockwise. 2. Select either FM1, FM2, FM3, or AM mode. 3. Tune to a desired station, manually or automatically, with the Manual tuning, Seek or Preset buttons. 4. Adjust the Volume and Balance controls to your liking. 5. The stereo indicator light is on the Digital dis...