Оценок - 4, средний балл: 3.8
(
)
)
|
Фото и характеристики JL Audio M600/1 |
Фрагмент инструкции
Your amplifier has been designed and manufactured to exacting standards in order to ensure years of musical enjoyment in your vessel. For maximum performance, we highly recommend that you have your new amplifier installed by an authorized JL Audio dealer. Your authorized dealer has the training, expertise and installation equipment to ensure optimum performance from this product. Should you decide to install the amplifier yourself, please take the time to read this manual thoroughly so as to familiarize yourself with its installation requirements and setup procedures. If you have any questions regarding the instructions in this manual or any aspect of your amplifier’s operation, please contact your authorized JL Audio dealer for assistance. If you need further assistance, please call the JL Audio Technical Support Department at (954) 443-1100 during business hours. ProteCt Your Hearing! We value you as a long-term customer. For that reason, we urge you to practice restraint in the operation of this product so as not to damage your hearing and that of others in your vessel. Studies have shown that continuous exposure to high sound pressure levels can lead to permanent (irreparable) hearing loss. This and all other high-power amplifiers are capable of producing such high sound pressure levels when connected to a speaker system. Please limit your continuous exposure to high volume levels. While driving, operate your audio system in a manner that still allows you to hear necessary noises to operate your vessel safely (horns, sirens, etc.). serial number In the event that your amplifier requires service or is ever stolen, you will need to have a record of the product’s serial number. Please take the time to enter that number in the space provided below. The serial number can be found on the bottom panel of the amplifier and on the amplifier packaging. Serial Number: Infrasonic Filter Selection (pg. 9) installation aPPliCations This amplifier is designed for operation in vessels with 12 volt, negative-ground electrical systems. Use of this product in vessels with positive ground and/or voltages other than 12V may result in damage to the product and will void the warranty. This product is not certified or approved for use in aircraft. Do not attempt to “bridge” the outputs of this amplifier with the outputs of a second amplifier, including an identical one. LP Filter Filter Status Mode/Slope Frequency LED Selection Selector (pg. 11) (pg. 8) (pg. 8) Input Sensitivity Control (pg. 7) 2 | JL Audio - M600/1 Owner’s Manual Planning Your installation It is important that you take the time to read this manual and that you plan out your installation carefully. The following are some considerations that you must take into account when planning your installation. Cooling efficiency Considerations: The outer shell of your JL Audio amplifier is designed to remove heat from the amplifier circuitry. For optimum cooling performance, this outer shell should be exposed to as large a volume of air as possible. Enclosing the amplifier in a small, poorly ventilated chamber can lead to excessive heat build-up and degraded performance. If an installation calls for an enclosure around the amplifier, we recommend that this enclosure be ventilated with the aid of a fan. In normal applications, fan-cooling is not necessary. Chassis Ground Left & Right Connector Preamp Input Jacks (pg. 5) (pg. 7) Mounting the amplifier upside down is strongly discouraged. safety Considerations: Your amplifier needs to be installed in a dry, well-ventilated environment and in a manner which does not interfere with your vessel’s factory installed electronic devices. You should also take the time to securely mount the amplifier using the supplied screws so that it does not come loose in the event of a collision or a sudden jolt to the vessel. stupid mistakes to avoid: • Check before drilling any holes in your vessel to make sure that you will not be drilling through the hull, a fuel tank, fuel line, wiring harness or other vital vessel system. • Do not run system wiring outside or underneath the vessel. This is an extremely dangerous practice which can result in severe damage to your vessel and person. • Protect all system wires from sharp edges (metal, fiberglass, etc.) by carefully routing them, tying them down and using grommets and loom where appropriate. • Do not mount the amplifier in the engine compartment or in any other area that will expose the amplifier circuitry to the elements. While this amplifier is specially designed for marine applications, it is not waterproof and it should not be mounted where it is likely to get wet. Jack for +12 V Power Remote Turn-On Left & Right Remote Level Mono Connector Connector Preamp Output Jacks Control Knob Subwoofer Outputs (pg. 5) (pg. 6) (pg. 10) (pg. 9) (pg. 10) ProduCt desCriPtion The M600/1 is a monoblock amplifier utilizing JL Audio NexD™ high speed switching technology to deliver outstanding fidelity and ...
Эта инструкция также подходит к моделям:Лодочное оборудование - MAN-01-2010 (900.27 kb)