Оценок - 3, средний балл: 4
(
)
)
|
Фрагмент инструкции
EXPLICIT DEFINITIONS WORD DEFINITION RWARNING Personal injury, fire hazard or electric shock may occur. CAUTION Equipment damage may occur. NOTE If disregarded, inconvenience only. No risk of personal injury, fire or electric shock. Icom, Icom Inc. and the logo are registered trademarks of Icom Incorporated (Japan) in the United states, the United Kingdom, Germany, France, Spain, Russia and/or other countries. SmarTrunk II™ is a trademark of the SmarTrunk Systems, Inc. PRECAUTION RWARNING! NEVER connect the transceiver to an AC outlet. This may pose a fire hazard or shock. NEVER connect the transceiver to a power source than 16 V DC such as a 24 V battery. This connection will ruin the transceiver. NEVER cut the DC power cable between the DC plug and fuse holder. If an incorrect connection is made after cutting, the transceiver might be damaged. NEVER place the transceiver where normal operation of the vehicle may be hindered or where it could cause bodily injury. NEVER allow children to touch the transceiver. NEVER expose the transceiver to rain, snow or any liquids. USE the supplied microphone only. Other microphones have different pin assignments and may damage the transceiver. DO NOT use or place the transceiver below –30°C (–22°F) in areas subject to direct sunlight, AVOID operating the transceiver without running engine. The vehicle’s battery will quickly run out if the transceiver transmits while the vehicle’s engine OFF. AVOID placing the transceiver in excessively dusty environments. AVOID placing the transceiver against walls. This will obstruct heat dissipation. AVOID the use of chemical agents such as benzine or alcohol when cleaning, as they damage the transceiver surfaces. BE CAREFUL! The transceiver will become hot when operating continuously for long periods. TABLE OF CONTENTS IMPORTANT .................................................................................... i EXPLICIT DEFINITIONS ................................................................. i PRECAUTION .................................................................................. i TABLE OF CONTENTS .................................................................. ii 1 PANEL DESCRIPTION ........................................................... 1– 6 Front panel ............................................................................... 1 Function display ....................................................................... 2 Programmable function keys .................................................... 3 2 OPERATION .......................................................................... 7–10 Turning power ON .................................................................... 7 Channel selection ..................................................................... 7 Receiving and transmitting ....................................................... 8 DTransmitting notes ................................................................. 8 DTX code channel selection .................................................... 9 DTX code number selection .................................................... 9 DDTMF transmission ............................................................... 9 DScrambler function ................................................................ 9 DUser set mode ..................................................................... 10 3 OPTIONAL SmarTrunk IITM OPERATION .......................... 11–12 SmarTrunk IITM and conventional modes ............................... 11 SmarTrunk IITM operation ....................................................... 11 4 CONNECTION AND MAINTENANCE ................................ 13–17 Rear panel and connection .................................................... 13 Supplied Accessories ............................................................. 14 Mounting the transceiver......................................................... 15 Optional UT-105, UT-108 or UT-111 installation ..................... 15 Optional UT-109 or UT-110 installation .................................. 16 Optional OPC-617 installation................................................. 16 Antenna................................................................................... 17 Fuse replacement .................................................................. 17 Cleaning ................................................................................. 17 5 OPTIONS ................................................................................... 18 1 PANEL DESCRIPTION Front panel yt qAF VOLUME CONTROL KNOB Rotate the knob to adjust the audio output level. • Minimum audio level is pre-programmed. wFUNCTION DISPLAY Displays a variety of information, such as an operating channel number/name, 5-tone code, DTMF numbers and audible condition, etc. NOTE: The above functions depend on pre-programming. q w e r eUP/DOWN [ ]/ [ ] KEYS . Push to select the operating channe...
Эта инструкция также подходит к моделям:Лодочное оборудование - IC-F210 (733.5 kb)