Оценок - 3, средний балл: 4.7
(
)
)
|
Фрагмент инструкции
Printed in USA. All product names are trademarks of their respective companies. LIMITED WARRANTY AND LIMITATION OF LIABILITY This Fluke product will be free from defects in material and workmanship for three years from the date of purchase. This warranty does not cover fuses, disposable batteries, or damage from accident, neglect, misuse, alteration, contamination, or abnormal conditions of operation or handling. Resellers are not authorized to extend any other warranty on Fluke’s behalf. To obtain service during the warranty period, contact your nearest Fluke authorized service center to obtain return authorization information, then send the product to that Service Center with a description of the problem. THIS WARRANTY IS YOUR ONLY REMEDY. NO OTHER WARRANTIES, SUCH AS FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSED OR IMPLIED. FLUKE IS NOT LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LOSSES, ARISING FROM ANY CAUSE OR THEORY. Since some states or countries do not allow the exclusion or limitation of an implied warranty or of incidental or consequential damages, this limitation of liability may not apply to you. Fluke Corporation P.O. Box 9090 Fluke Europe B.V. P.O. Box 1186 Everett, WA 98206-9090 5602 BD Eindhoven U.S.A. The Netherlands 11/99 Safety Information A Warning identifies conditions and procedures that are dangerous to the user. A Caution identifies conditions and procedures that can cause damage to the Product or the equipment under test. XWWarning To prevent possible electrical shock, fire, or personal injury: • Use the Product only as specified, or the protection supplied by the Product can be compromised. • The battery door must be closed and locked before you operate the Product. • Replace the batteries when the low battery indicator (.) shows to prevent incorrect measurements. • Do not use and disable the Product if it is damaged. • Read all safety Information before you use the Product. • Do not use the Product in damp or wet environments. • Batteries must only be changed in an area known to be non-hazardous. Explosion hazard. • Do not use the RS-232 interface in hazardous areas. WCaution To avoid possible damage to Product or to equipment under test: • If the display reads “OL” the range limit is exceeded and the pressure source must immediately be removed. • Do not exceed the maximum torque allowed. Maximum torque allowed is 13,5 Nm = 10 ftlbs. 700G Series Safety Information Hazard Location Information/Approvals Ex Hazardous Areas An Ex-hazardous area as used in this manual refers to an area made hazardous by the potential presence of flammable or explosive vapors. These areas are also referred to as hazardous locations, see NFPA 70 Article 500. ) ® LR110460 Class I, Div. 2, Groups A-D ( II 3 G Ex nA IIB T6 KEMA 06ATEX0014 X Ta=–10 °C... +55 °C Special Conditions for Safe Use Misuse If the Product is exposed to overpressure or sudden physical shock (such as being dropped) examine it for any damage that can cause a safety concern. If necessary, return the Product for evaluation to Fluke. Refer to the How to Contact Fluke section. WWarning To prevent possible fire, or personal injury: • Do not use the Product with flammable substances. • The Product is intended for installation only in locations providing adequate protection against the entry of solid foreign objects or water capable of impairing safety. Pressure Gauge Safety Information Symbols Symbols used on the Product and in this manual are explained in Table 1. Table 1. Symbols Symbol Meaning Symbol Meaning W Risk of danger. Important information. See manual. P Conforms to European Union directives. X Hazardous voltage. Risk of electrical shock. ) Conforms to relevant North American Safety Standards. f Pressure ~ Do not dispose of this product as unsorted municipal waste. Go to Fluke’s website for recycling information. . Conforms to relevant Australian standards. ( Conforms to ATEX requirements 700G Series Safety Information How to Contact Fluke To contact Fluke, call one of the following telephone numbers: • Technical Support USA: 1-800-44-FLUKE (1-800-443-5853) • Calibration/Repair USA: 1-888-99-FLUKE (1-888-993-5853) • Canada: 1-800-36-FLUKE (1-800-363-5853) • Europe: +31 402-675-200 • Japan: +81-3-6714-3114 • Singapore: +65-738-5655 • Anywhere in the world: +1-425-446-5500 Or, visit Fluke’s website at To register your product, visit To view, print, or download the latest manual supplement, visit ...