Оценок - 2, средний балл: 3.5
(
)
)
|
Фрагмент инструкции
Kirby Morgan Dive Systems, Inc. 1430 Jason Way Santa Maria, CA 93455, USA Telephone (805) 928-7772, FAX (805) 928-0342 E-Mail: kmdsi@KirbyMorgan.com, Web Site:Manual prepared by Marine Marketing and Consulting, Dive Lab, Inc., and KMDSI. NOTE: This manual is the most current for the Kirby Morgan 47 Helmet. It is page dated May 2007. Future changes will be shown on page III and the changed pages will carry the date of change. Previous manuals may not reflect these updates. WARNING Diving with compressed breathing gas is a hazardous activity. Even if you do everything right there is always the danger that you may be killed or injured. No piece of diving equipment can prevent the possibility that you may be killed or injured any time you enter the water. The Kirby Morgan 47 helmet meets or exceeds all performance and testing requirements of all government and non-government testing agencies throughout the world. It is approved for use on all commercial and military work underwater. Only Kirby Morgan masks and helmets have achieved the CR (Commercially Rated) mark, the highest United States of America rating. SuperLite, Band Mask, KMB, KMB BandMask, Kirby Morgan, DSI, Diving Systems International, EXO, SuperFlow, REX, SuperMask, the color yellow on diving helmets and masks, and DECA are all registered trademarks of Kirby Morgan Dive Systems, Inc. Use of these terms to describe products that are not manufactured by KMDSI is not permitted. The two dimensional images (such as photographs and illustrations) of our products are © copyrighted and trademarks of Kirby Morgan Dive Systems, Inc. The three dimensional forms of our products are trademark/trade dress protected. © Copyright 1970-2007 Kirby Morgan Dive Systems, Inc. All rights reserved. This manual is made available for the express use of the owner of this Kirby Morgan product. No part of this manual may be reproduced, stored in any retrieval system, or transmitted, or used in any form or by any means, whether graphic, electronic, mechanical, photocopy, or otherwise by technology known or unknown, without the prior written permission of Kirby Morgan Dive Systems, Inc. Document Number 070604002 Kirby Morgan 47 WARRANTY INFORMATION Kirby Morgan Dive Systems, Inc. warrants every new mask, helmet, or KMAC Air Control System to be free from defects in workmanship for a period of ninety (90) days from date of purchase. This warranty covers all metal, fiberglass, and plastic parts. This warranty does NOT cover rubber parts, communications components, or headliners. In addition, due to the electrolytic nature of underwater cutting and welding, chrome plating cannot be warranted when the diver engages in these activities. Should any part become defective, contact the nearest authorized KMDSI dealer. If there is no dealer in your area, contact KMDSI directly at (805) 928-7772. You must have a return authorization from KMDSI prior to the return of any item, Upon approval from KMDSI, return the defective part, freight prepaid, to the KMDSI plant. The part will be repaired or replaced at no charge as deemed necessary by KMDSI. This warranty becomes null and void if: 1) The product is not registered with KMDSI within ten (10) days of purchase. 2) The product has not been properly serviced and/or maintained according to the appropri- ate KMDSI manual. In addition, the user is responsible to ensure that all product updates as recommended by KMDSI have been performed. 3) Unauthorized modifications have been made to the product. 4) The product has been abused or subjected to conditions which are unusual or exceed the product’s intended service. NOTE: Be sure to complete the enclosed warranty card and return it to KMDSI immediately. No warranty claims will be honored without a satisfactorily completed warranty card on file at KMDSI. © Copyright 1970-2007 Kirby Morgan Dive Systems, Inc. All rights reserved. Document # 070604002 Kirby Morgan 47 RECORD OF CHANGES It is the responsibility of the owner of this product to register their ownership with Kirby Morgan Dive Systems, Inc., by sending the warranty card provided. This card is to establish registration for any necessary warranty work and provides a means of communication that allows KMDSI to contact the user regarding this product. The user must notify KMDSI of any change of address by the user or sale of the product. All changes or revisions to this manual must be recorded in this document to ensure that the manual is up to date. Change Number Date Description of Change Page Number © Copyright 1970-2007 Kirby Morgan Dive Systems, Inc. All rights reserved. Document #070604002 Kirby Morgan 47 WARNING Diving with compressed breathing gas is a hazardous activity. Even if you do everything right there is always the potential for serious injury or death. No one piece of diving equipment can prevent the possibility that you may be injured or killed any time you enter the water. We do not herein make any effort t...