Оценок - 4, средний балл: 4
(
)
)
|
Фрагмент инструкции
The GMI™ 10 allows you to quickly view important information about your boat provided by connected sensors. Connected sensors transmit data to the GMI 10 using NMEA 2000® or NMEA 0183. To install your GMI 10, use the included installation instructions. For a list of compatible sensors and for more information about NMEA 2000, visit The GMI 10 is NMEA 2000 certified. Manual Conventions In this manual, when you are instructed to select an item, use the soft keys ( ) along the bottom of the screen to select each item. Small arrows (>) in the text indicate that you should select each item in order. Instrument Screen—the instrument screen displays data provided by a sensor. Menu Screens—screens used to define options. GMI 10 Quick Start Manual Unit Overview BackSoftkeys Instrument screen Power Power—press and hold to power the unit on and off. Press and quickly release to adjust display settings. Soft Keys—used to navigate the menus and select items on the GMI 10. Typically, the left and right soft keys cycle data on the instrument screen and navigate menu screens, and the center soft key selects highlighted items and opens the Menu. Back—used to move back one menu screen. Press and hold to move all the way back to the instrument screen from any menu screen. GMI 10 Quick Start Manual Using the GMI 10 Use the GMI 10 to view numerical data provided by connected sensors. Many data types can also be displayed as an analog gauge. The types of data available are determined by the sensors connected to the GMI 10 either through NMEA 2000 or NMEA 0183. For example, when connected to a GPS antenna such as a GPS 17x, the GMI 10 can show GPS position, GPS heading (COG), GPS speed (SOG), average speed, maximum speed obtained, and distance traveled (trip odometer) information. Viewing Information Instrument screens are organized by category. Categories match the data available on an instrument, such as depth instruments. You can configure the GMI 10 to mix data from common instruments to make a custom instrument tailored to the sensors on your boat. Each category can contain a variety of screens that you can quickly cycle through. Selecting an Instrument Screen Category Change the instrument screen to a different category from the menu: 1. From the instrument screen, select Menu > Setup > Set Instrument Type. GMI 10 Quick Start Manual 2. Choose from the categories • Custom—arrange a custom listed below. set of instruments. Utilize an • Surface—GPS or water speed, GPS heading or magnetic sensor heading, and odometer. • Water—depth and water temperature. • Fuel—level, rate, range, and economy. • Wind—wind speed and angle, ground wind speed and direction, wind velocity made good (VMG), race timer, wind and weather graphs, barometric pressure, and air temperature. • Engine—RPM, fuel flow, trim, temperature, pressure, voltage, hours, neutral indicator, and status indicators. existing instrument or graph, or create a custom instrument screen. Cycling Through Instrument Screens in a Category When viewing a category, use the soft keys under the left and right arrows to cycle through the screens available in that category. Cycle through instrument screens GMI 10 Quick Start Manual Changing Instrument Screen Options Data provided on an instrument screen is represented numerically. In many cases, a numerical value can be shown as an analog gauge or as a graph, and vice versa (not available on all instrument screens). To change the appearance of an instrument screen: • If the instrument screen is showing a number, select Menu > Show Gauge or Show Graph. • If the instrument screen is showing a gauge or a graph, select Menu > Show Number. To change additional options on an instrument screen: 1. From the instrument screen, select Menu. 2. To change the source sensor, select Source, and choose the sensor you want to use. For example, if you have a GPS antenna and a heading sensor, you can choose to show either GPS Heading (COG) or Heading from the heading sensor. 3. To change additional options, such as resetting an odometer, adding Trip Speed Graphics to a speed gauge, viewing a water- temperature graph, or adding fuel, select the option you want to change. GMI 10 Quick Start Manual Understanding Custom Instrument Screens You can create up to ten of the following kinds of customized displays on the GMI 10: • You can organize individual screens found in the predefined categories (for multiple instruments) to create your own customized collection of screens. • You can select the individual fields to show on each screen to create customized screens. To create a customized combination of individual instrument screens found in the predefined categories: 1. Select Menu > Setup > Set Instrument Type > Custom. 2. Use the soft keys under the left and right arrows to cycle through the instrument screens available in the selected category. 3. Select Select to add a screen. To create the first custom instrument screen: 1. From the instr...
Эта инструкция также подходит к моделям:Лодочное оборудование - 190-01015-01 (685.57 kb)