Оценок - 2, средний балл: 3.5
(
)
)
|
Фрагмент инструкции
They are made from the same material used in the OMEGAMARKER® temperature indicating products this time in a lacquer suspension. Lacquer serves as a transport function only. The OMEGALAQ® temperature indicating liquids are used to tell temperatures on surfaces such as polished metal, glass, plastics, rubber, fabrics or electronic components. They can be used for making large marks which can be viewed at a distance. These temperature indicating liquids are widely used for monitoring critical temperatures in the electronics field, such as preheat temperatures for wave soldering. Other applications include dielectric heatsealing, postforming plastic laminate, and annealing polished metal surfaces. The OMEGALAQ® liquids (LAQ) have a time response on the order of milliseconds (0.001 sec.). They are available in many temperature ratings. The OMEGALAQ® liquids have an accuracy of ±1% of the rated temperature. DIRECTIONS FOR USE: LIQUID TYPE: Shake and/or stir jar contents well just prior to use. Apply a thin coating by using a brush to the surface being tested before the object being tested is brought up to temperature. It dries almost instantly to a dull opaque finish. When its specific temperature is reached, the opaque finish liquifies abruptly. The melted material does not revert to its original opaque appearance but remains glossy and transparent upon cooling. OMEGALAQ® liquids can be diluted to any desired consistency without changing its melting point. The thinner the coating used, the quicker the reaction time will be when the rated temperature has been reached. When thinning, use OMEGA’s OMEGALAQ® Green Label Thinner only. REMOVAL AND CLEANING: For lacquers with temperature ratings of 650°F or below, the unheated mark can be removed with alcohol or water. For ratings above 650°F, use water only. If the mark has been heated well above the rated temperature and has become charred, an abrasive procedure may be required for removal. OMEGALAQ® LIQUIDS IN A VACUUM: The following rated OMEGALAQ® liquids are the best candidates for high vacuum work. They show relatively little loss of substance in a vacuum at the temperature level of their respective melting points, compared to other OMEGALAQ® products of nearby temperatures. TEMPERATURES (°F) 175 200 475 1150 1500 1800 2000 225 488 1200 1600 1900 325 500 1250 1700 700 1300 750 Bear in mind that prolonged heating in a high vacuum, or heating to a temperature well above the melting point, some sublimation or evaporation is to be expected. Thus, the user needs to check the suitability of OMEGALAQ® products under the temperature/pressure/time regime planned. OMEGA assumes no responsibility for the use of OMEGALAQ® products under vacuum conditions. SHELF LIFE: Temperature indicating Products have a limited shelf life. By verifying the melting point of the lacquers at six- month intervals, the effective shelf life of these products may be extended indefinitely. If they have dried out, OMEGALAQ® products may be liquefied by using the Green Label Thinner. See directions for use and warranty for further information. OMEGAnet® Online Service Internet e-mail info@omega.com OMEGAnet® Online Service Internet e-mail info@omega.com Servicing North America: USA: One Omega Drive, Box 4047 ISO 9001 Certified Stamford CT 06907-0047 Tel: (203) 359-1660 FAX: (203) 359-7700 e-mail: info@omega.com Canada: 976 Bergar Laval (Quebec) H7L 5A1, Canada Tel: (514) 856-6928 FAX: (514) 856-6886 e-mail: info@omega.ca For immediate technical or application assistance: USA and Canada: Sales Service: 1-800-826-6342 / 1-800-TC-OMEGA® Customer Service: 1-800-622-2378 / 1-800-622-BEST® Engineering Service: 1-800-872-9436 / 1-800-USA-WHEN® TELEX: 996404 EASYLINK: 62968934 CABLE: OMEGA Mexico: En Espan.ol: (001) 203-359-7803 e-mail:espanol@omega.com FAX: (001) 203-359-7807 info@omega.com.mx Servicing Europe: Benelux: Postbus 8034, 1180 LA Amstelveen, The Netherlands Tel: +31 (0)20 3472121 FAX: +31 (0)20 6434643 Toll Free in Benelux: 0800 0993344 e-mail: sales@omegaeng.nl Czech Republic: Frystatska 184, 733 01 Karvina, Czech Republic Tel: +420 (0)59 6311899 FAX: +420 (0)59 6311114 Toll Free: 0800-1-66342 e-mail: info@omegashop.cz France: 11, rue Jacques Cartier, 78280 Guyancourt, France Tel: +33 (0)1 61 37 2900 FAX: +33 (0)1 30 57 5427 Toll Free in France: 0800 466 342 e-mail: sales@omega.fr Germany/Austria: Daimlerstrasse 26, D-75392 Deckenpfronn, Germany Tel: +49 (0)7056 9398-0 FAX: +49 (0)7056 9398-29 Toll Free in Germany: 0800 639 7678 e-mail: info@omega.de United Kingdom: One Omega Drive, River Bend Technology Centre ISO 9002 Certified Northbank, Irlam, Manchester M44 5BD United Kingdom Tel: +44 (0)161 777 6611 FAX: +44 (0)161 777 6622 Toll Free in United Kingdom: 0800-488-488 e-mail: sales@omega.co.uk It is the policy of OMEGA to comply with all worldwide safety and EMC/EMI regulations that apply. OMEGA is constantly pursuing certification of its products to the Europea...
Эта инструкция также подходит к моделям:Лодочное оборудование - LAQ-XXXX M1319 (67.61 kb)