Оценок - 2, средний балл: 4.5
(
)
)
|
Фрагмент инструкции
A 08-05 1NM SIDELIGHTS (SERIES 3560) For boats up to 12 meters / 39.4 feet. Meets USCG CFR 183.810, ABYC A-16 requirements and all applicable standards as tested by Imanna Laboratories, on 4/25/2008. 1 nautical mile visibility. 2NM SIDELIGHTS (SERIES 3570) For boats up to 50 meters / 164 feet. Meets USCG CFR 183.810, ABYC A-16 requirements and all applicable standards as tested by Imanna Laboratories, on 5/9/2008. 2 nautical mile visibility. REQUIRED FOR INSTALLATION Phillips screwdriver • Drill and bits: 3/8" (10mm) for wire clearance hole and 1/8" (3mm) for mounting holes• Pilot 1/8" (3mm) drill for mounting screws • Two #8 pan head stainless steel screws (not included) • LOCATION Before drilling mounting hole, position sidelights on a surface of the gunwale or 1. deck where you are certain that sidelights: Are equal distance from the bow (Figure 1) • Shine straight ahead • Shine within a 5° of horizontal when the boat is fl oating • The light beam is not obstructed • Place lights with the light labeled red on the port (left) and th...
Эта инструкция также подходит к моделям:Лодочное оборудование - 3570 (109.4 kb)