Оценок - 3, средний балл: 4
(
)
)
|
Фрагмент инструкции
Use the and keys to select the desired bank. Press the A key to enable (e) or disable (D) the bank for scan. Press the and keys to select another bank or press B D C or to exit. Channel Scan Edit To add or remove a channel in the current bank from the scan list, press and hold the Scan programmable button for two seconds. Use the and keys to select the desired channel. Press the A key to enable (e) or disable (D) the channel in the scan list. Press the and C keys to D select another channel or press B , or to exit. In the example below, channels 2A, 1C and 3C will be scanned. Channels 1B and 2B will not be scanned since channel bank B is disabled from scanning. CH BNK A e CH 1A D CH 2A e © 2007, Midland Radio Corporation Olympian™ Series Mobile Radio User’s Guide CH BNK B D CH 1B e CH 2B e CH 3B D CH BNK C e CH 1C e CH 2C D CH 3C e CH 4C D © 2007, Midland Radio Corporation Olympian™ Series Mobile Radio User’s Guide press A B C or D to exit. Programmable Functions For increased flexibility and customization, the 6 front panel D C buttons A and B may be programmed with up to six (6) of the following functions: ..Bank Press and release this button to enter bank select mode. Then use the and keys to select the desired bank then Press and hold this button for two seconds to enter bank scan edit mode. ..Call Alert Press and release this button to enable the horn output. After a 2-tone or DTMF (option) sequence is decoded the horn output will activate as programmed. • A decoded call must be reset by a call reset programmable button or the call reset timer, before the horn output can be enabled again. ..Call Reset Press and release this button to mute the radio after a 2-tone sequence or DTMF (option) is decoded. ..Call Send Press and release this button to send the programmed 2-tone or DTMF encode sequence. One of the ten 2-tone or four DTMF (option) sequences can be selected by channel programming. ..Channel Up Press and release this button to increment the radio to the next channel. Press and hold to scroll channels. ..Channel Down Press and release this button to decrement the radio to previous channel. Press and hold to scroll channels. © 2007, Midland Radio Corporation Olympian™ Series Mobile Radio User’s Guide ..Emergency Press and hold this button to activate the emergency function. The programmed emergency response will be performed. After the emergency response is performed, the display will continue to flash “EMER” until another control is used (if emergency display is enabled). ..Keylock Press and hold for one second to lock all other front panel keys. Press and hold again to unlock. ..Memory Channel 1 & 2 Press and release the programmed button to switch to the assigned (preset) channel. If allowed by dealer programming, press and hold the programmed function button to assign the current channel as the 1st or 2nd memory channel. ..Unsquelched Monitor Press and release this button to disable 2-tone, DTMF (option), CTCSS, DCS and noise squelch. Once activated, press any button to disable unsquelched monitor mode. While scan is paused on a channel, press this button to temporarily remove the pause channel from the scan list. ..Normal Monitor Press and release this button to disable 2-tone, DTNF (option), CTCSS and DCS signaling. Once activated, press any button to disable normal monitor mode. While scan is paused on a channel, press this button to temporarily remove the pause channel from the scan list. ..Latched Normal Monitor Press and release this button to disable 2-tone, DTMF (option), CTCSS and DCS signaling. Once activated, the latched normal monitor remains active until this button is pressed again. This mode must be turned off before scan may be started. While scan is paused on a channel, press this button to temporarily remove the pause channel from the scan list. © 2007, Midland Radio Corporation Olympian™ Series Mobile Radio User’s Guide ..Panel Display Press and release this button to turn off the LCD. Press again to turn the display back on. ..Public Address Press and release this button to activate public address mode. Press again to return to normal radio operation. ..Scan Press and release this button to activate scan. Press again to turn scan off. Press and hold this button for two seconds to enter channel scan edit mode. ..Scan Escape Press and release this button to temporarily suspend scan for communication on the last received channel. Press the Scan Escape button again to resume scanning. This function allows you stop scan and communicate on the last received channel, in case you were unable to immediately respond to the call, without affecting your priority channel set-up. ..Scan Skip While scan is paused on a channel, press this button to temporarily delete the pause channel from the scan list. While scan is off, press this button to remove the selected channel from the ...
Эта инструкция также подходит к моделям:Лодочное оборудование - OLYMPIANTM SERIES MO-4128 (338.1 kb)
Лодочное оборудование - OLYMPIANTM SERIES MO-7008 (338.1 kb)