Оценок - 3, средний балл: 3.7
(
)
)
|
Фрагмент инструкции
com NAVMAN RF Emissions and Installation Notice: This equipment has passed Australian Type Certification Standards AS4355 and AS4367. It generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures: • reorient or relocate the receiving antenna. • increase the separation between the equipment and receiver. • connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • consult the dealer or an experienced radio/TV technician for help. ACA Maritime Licensing Statement for both 27 MHz and VHF 1. A person must not operate (as) a maritime ship station on land. 2. A person operating a maritime ship station must use a form of identification at the start of each transmission, or series of transmissions, that clearly identifies the station. 3. Refer to the following Internet Website for more information: It is the owner’s sole responsibility to install and use the instrument in such a manner that will not cause accidents, personal injury or property damage. Navman NZ Limited disclaims all liability for any use of this product in a way that may cause accidents, damage or that may violate the law. Governing Language: This statement, any instruction manuals, user guides and other information relating to the product (Documentation) may be translated to, or has been translated from, another language (Translation). In the event of any conflict between any Translation of Documentation, the English language version of the Documentation will be the official version of the Documentation. This manual represents the Navman MCB 7270 radio at the time of printing. Navman NZ Limited reserves the right to make changes to specifications without notice. Copyright © Navman NZ Limited, New Zealand. All rights reserved. NAVMAN is a registered trademark of Navman NZ Limited. 4 NAVMAN MCB 7270 Marine CB 27 MHz Radio Operation Manual Contents 1 - General Information 5 1.1 FEATURES 5 1.2 SCREEN SYMBOLS AND MEANINGS 6 2 - Basic Operation 7 2.1 KEY FUNCTIONS 7 2.2 RESET TO FACTORY DEFAULTS 10 2.3 EXAMPLE SCREENS 10 2.3.1 Power Up Sequence Screens 10 2.3.2 Channel Band Selection Screens 10 2.3.3 Transmission Screen 11 2.3.4 Noise Rejection Selection Screens 11 2.3.5 Battery Voltage Screens 11 2.3.6 Priority Channel Screens (Australia) 12 2.3.7 ALL SCAN Mode Screens 12 2.3.8 Locked Out and Unlocked Channel Screens 12 2.3.9 Store Favourite Channels Screens 13 2.3.10 PSCAN Working Channel Screen 13 2.3.11 PSCAN Favourite Channel Screen 13 Appendix A - Technical Specifications 14 Appendix B - Troubleshooting 15 Appendix C - Radio Channels (Australia) 16 C.1 MARINE (MB) FREQUENCIES 16 C.2 LAND (CB) FREQUENCIES 17 Appendix D - How to Contact Us 18 1 - General Information 1.1 Features Congratulations on your purchase and installation of a Navman MCB 7270 27MHz radio. It provides you with the following useful features: • Marine band (MB) communications with a land band (CB) capability, with six favourite channels (three for each band). • Large LCD screen with prominent (17mm high) channel display. • Special size, highlighted symbols for Tx (transmission), Rx (reception), and X (Channel Lockout). • Powerful transmission output (4W maximum legal). • Adjustable brightness settings for the screen and keypad for easy use in all lighting conditions - including night time and bright sunlight. • Adjustable backlighting for the microphone. • Long cable for the microphone (2.3m when comfortably stretched). • Extension cable with jack, for connection to an external speaker. • Top centred PTT button for comfortable left- or right-handed use. • Quick access keys on the microphone for easy selection of channels (+/-), priority channels (88/9), local mode (LOC) and favourite channel functions (3CH). • Channel 88/9 Priority/Distress key on the radio unit and microphone. • Special 3CH key for easy selection of your three favourite channels. • Most recently used channel is remembered and displayed at power up. • PSCAN facility to scan the working channel and the priority channel, or the favourite channel(s) and the priority channel (similar to a dual watch facility). • ALL SCAN mode with busy channel lockout facility. • Noise rejection can be activated from chassis or microphone. • Powerful external speaker (up to 4W). • Voltage indicator (and low battery warning) for the battery supplying the radio. • Waterproof and submersible to comply with JIS-7. • Meets AS4355 and AS4367 technical specifications. 1....