Оценок - 3, средний балл: 3.7
(
)
)
|
Фрагмент инструкции
"+/2146#06"# If an icon appears at the end of a paragraph, go to the side head box on that page with the corresponding icon for pertinent information. o Ry — Signifies a Warning + ....— Signifies a Caution — Signifies Important text %106'06R Attaching the Microphone Holder ........ 1 Mounting the Transceiver ................... 2 Connecting an Antenna ...................... 3 Connecting the Microphone ................ 4 Connecting an External Speaker ........ 4 Connecting a CB Speaker .......... 4 Connecting a PA Speaker .......... 4 Connecting the Compass .................... 4 Connecting an Optional Microphone/Earphone ......................... 5 Traffic Safety .............................. 5 Using Vehicle Battery Power ............... 5 Using the Transceiver as a Base Station ................................ 6 Using Your CB .................................... 6 Receiving Transmissions and Adjusting Squelch .................... 6 Transmitting ..................................... 7 Selecting the Emergency Channel .. 7 Using the PA Amplifier ..................... 7 Using Monitor .................................. 8 Using the Compass ......................... 8 Using Memory ................................. 9 Using Last Channel Recall (RCL) ... 9 Adjusting the Backlight .................... 9 Transmission Courtesy .................... 9 Using Common 10-Codes ............. 10 Maximum Range ........................... 11 Troubleshooting ................................ 11 FCC Information ................................ 12 Reducing Noise ............................. 13 Care .................................................. 14 Service and Repair ........................ 14 Replacing the Fuse ....................... 14 Specifications .................................... 15 Parts and Accessories ...................... 16 ."%#76+10".# Be careful not to drill into anything behind the mounting surface. Thank you for purchasing a RadioShack 40 Channel Mobile CB. Your CB is a great way to communicate with other CB radio operators. You can mount it in a vehicle for mobile use, or in your home for use as a base station. To use this CB, you must connect a mobile or base station antenna. Your local RadioShack store has a wide variety of antennas. For more information, see “Connecting an Antenna” on Page 3. #66#%*+0)"6*'"/+%412*10'"#*1.&'Q You can attach the microphone holder to the right side of the transceiver or to another location in your vehicle. To attach the holder to the transceiver, secure the holder to the right side using the supplied 3 mm machine screws and lock washer. To attach the holder to another location in the vehicle, such as the dashboard, follow these steps. 1. Using the holder as a template, mark the positions for the mounting screw holes at the desired location. 2. At each marked position, drill a small starter hole. + ....# © 2002 RadioShack Corporation. All Rights Reserved. RadioShack and RadioShack.com are trademarks used by RadioShack Corporation. Mounting the Transceiver R"9#40+0)R"# • If you use the CB in a vehicle, mount it securely to avoid damage to the CB or vehicle or injury to anyone in the vehicle during sudden starts or stops. • Do not mount the CB where it could damage or interfere with the operation of any passive restraint safety device (an airbag or seat belt). Mounting the Transceiver R"9#40+0)R"# • If you use the CB in a vehicle, mount it securely to avoid damage to the CB or vehicle or injury to anyone in the vehicle during sudden starts or stops. • Do not mount the CB where it could damage or interfere with the operation of any passive restraint safety device (an airbag or seat belt). ."%#76+10".# Be careful not to drill into anything behind the mounting surface. ±"016'"±"# If you cannot reach behind the mounting surface to attach the nuts on the bolts or machine screws, use the supplied plain washers and self-tapping screws. 3. Attach the holder at the mounting location using the supplied machine screws, spring washers, plain washers, and nuts. /1706+0)"6*'"64#05%'+8'Q The most common mounting location for this CB is under a vehicle’s dashboard. However, if you plan to use the CB as a base station, you can place it on a desk, shelf, or table (see “Using the Transceiver as a Base Station” on Page 6). If you are mounting the CB in a vehicle, choose a location where: Ry • You can easily reach the CB. • Wires and cables are clear of the vehicle’s pedals or other moving parts. • The CB is not directly in front of heating vents. • All wires and cables can reach their connection points. Follow these steps to mount the CB using the supplied hardware. 1. Using the mounting bracket as a template, mark the positions for the screw holes on the mounting surface. 2. In each marked location, drill a small starter hole. + ....# 3. Mount the bracket to the mounting surface with the supplied 5 mm bolts, spring washers, plain washers, and nuts. 4. Peel the backings off the adhesive on the b...