Оценок - 2, средний балл: 4.5
(
)
)
|
Фрагмент инструкции
Using too small of an extension cord can cause the cord to overheat. Extension Cord Ratings Cord Length Size (AWG) <25 Ft. 14 25-50 Ft. 12 50-100 Ft. 10 >100 Ft. Not recommended Personal Safety > Stay alert, watch what you are doing, and use common sense when operating a power tool. Do not use a power tool while tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating power tools may result in serious personal injury. > Use personal protective equipment. Always wear eye protection. Protective equipment such as dust mask, non- skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce the risk of personal injuries. (Eye protection must comply with ANSI Z87.1) > Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source, picking up, or carrying the tool. Carrying power tools with your finger on the switch or energizing power tools that have the switch on invites accidents. > Remove adjusting key or wrench before turning the power tool on. A wrench or a key that is left attached to a rotating part of the tool may result in personal injury. > Do not overreach. Keep proper footing and balance at all times. This enables better control of the tool in unexpected situations. > Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing, and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving parts. > If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards. Power Tool Use and Care > Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it is designed. > Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired. > Disconnect the plug from the power source before making any adjustments, changing accessories, transporting, or storing the tool. Such preventive safety measures reduce the risk of starting the tool accidentally. > Store idle tools out of reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users. > Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools. > Keep cutting tools sharp and clean. Properly maintained tools with sharp cutting edges are less likely to bind and are easier to control. > Use the power tool, accessories, and tool bits etc. in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation. Service > To reduce the risk of serious or fatal injury, never open the motor housing. Have your power tool serviced only by a qualified repair person using only identical replacement parts. > Any repairs to the laser must be carried out by the laser manufacturer or by an authorized agent of the laser manufacturer. Never attempt to replace the laser on this tool with a different type of laser. Specific Safety Rules for Miter Saws > To reduce the risk of serious or fatal injury, never alter or misuse the power tool. > Be certain the miter saw is mounted or securely placed on a level, firm work surface before using. A level and firm work surface reduces the risk of the miter saw becoming unstable or tipping. > Make sure all controls and clamping handles are secured before starting any operation. Unsecured clamps or adjustment handles can cause the saw and/or workpiece to move unexpectedly. > Always unplug the saw before servicing or changing the sawblade. > Never remove or disable the blade guard. Inspect the blade guard before use. Repair or replace a damaged or improperly functioning blade guard before further use. > Keep hands out of the path of the sawblade. Never cross your hand over intended line of cutting. Supporting the workpiece “cross handed” e.g. holding the left side of the workpiece with your right hand, is very dangerous. > Do not reach in back of the moving saw blade with either hand to remove wood scraps, hold down or support the workpiece, or for any other reason. The proximity of the spinning saw blade to your hand may not be obvious and you may be seriously injured. > Use clamps to support workpiece whenever possible. Do not use this saw to cut pieces that are too small to be securely clamped. > Clamp the offcut side of the workpiece when using a length stop. An unsecured offcut can bind...