Оценок - 3, средний балл: 4
(
)
)
|
Фрагмент инструкции
NOTE: To mount the saw to the stand, use the four hex head screws, flat washers, external tooth lockwashers and hex nuts (items 8, 9, 10 and 11) of the parts 'drawing. IF DURING OPERATION THERE IS ANY TENDENCY. 'FOR THE TOOL TO TIP OVER, SLIDE OR'WALK ON SUPPORTING SURFACE, THE STAND OR BENCH MUST BE SECURED TO THE FLOOR. Fig. 2‘ Replacement Parts Ref. Part Description No. No. Cat. #50-802 Stand Ass’y. Consisting of: 1 1087508 Front and Rear Panel* 2 1087507 Bottom Brace 3 1087509 Top Brace 4 SP-834 5/16-18 X 3/4" Carriage Bote 5 SP-1604 5/16 X 3/4 X 1/16" Washer 6 SP-1704 3/8" Split Lockwasher 7 SP-1030 5/16”-18 Hex Jam Nut 8 SP-1034 l/4"-20 Hex Nut 9 SP-1757 1/4“ External Tooth Lockwasher 10 SP-1603 1/4 X 9/16 X 3/64" Wash« 11 SP-625 1/4-20 X 3/4" Hex Hd. Screw...
Эта инструкция также подходит к моделям:Лобзики и пилы - 1087755 (727.66 kb)