Оценок - 2, средний балл: 4.5
(
)
)
|
Фрагмент инструкции
386782-01 DW705 Copyright 2001, 2002 Before returning call 1-800-4-DEWALT IF YOU SHOULD PURCHASE, CALL 1-800- IN MOST CASES, REPRESENTATIVE CAN RESOLVE YOUR PROBLEM OVER IF YOU HAVE A SUGGESTION OR GIVE US A CALL. YOUR FEEDBACK IS VITAL TO THE SUCCESS OF DEWALT'S QUALITY IMPROVEMENT INSTRUCTIVO DE OPERACION, CENTROS DE SERVICIO DE GARANTIA. ADVERTENCIA: LEASE ESTE INSTRUCTIVO INSTRUCTION MANUAL ANTES DE USAR EL PRODUCTO. GUIDE D.UTILISATION MANUAL DE INSTRUCCIONES DW705 (120 Volt)/DW705 (220 Volt) 12" Compound Miter Saw Scie a lnglets 300 mm (12 po) Sierra de angulo compuesto 300 mm (12" ) English Table of DOUBLE INSULATION/....................................SAFETY INSTRUCTIONS ......…………………………………………ADDITIONAL SAFETY RULES ........……………………………………………………….ELECTRICAL CONNECTION ........…………………………………………………………UNPACKING YOUR SAW ..........……………………………………………………………FAMILIARIZATION ......………………………………………………………………………SPECIFICATIONS........………………………………………………………………………OPTIONAL ACCESSORIES ......……………………………………………………………3 ACCESSORIES ............................................................................................................BENCH MOUNTING ........……………………………………………………………………4 INSTALLING THE BLADE ..........……………………………………………………………4 REAR LOWER GUARD ADJUSTMENT ......………………………………………………5 TRANSPORTING THE SAW..........…………………………………………………………5 ADJUSTMENTS ......…………………………………………………………………………5 MITER SCALE ADJUSTMENT ..........………………………………………………………5 MITER POINTER ADJUSTMENT ........……………………………………………………5 BEVEL SQUARE TO TABLE ........................................................................................5 BEVEL STOP ................................................................................................................6 FENCE ADJUSTMENT ......…………………………………………………………………6 GUARD ACTUATION AND VISIBILITY........………………………………………………6 AUTOMATIC ELECTRIC BRAKE ......................................................................................7 BRUSHES ........………………………………………………………………………………7 OPERATION ........……………………………………………………………………………SWITCH…………………………………………………………………………………CUTTING WITH YOUR SAW…………………………………………………………CROSSCUTS……………………………………………………………………………BEVEL CUTS……………………………………………………………………………QUALITY OF CUT………………………………………………………………………BODY AND HAND POSITION…………………………………………………………CLAMPING THE WORKPIECE………………………………………………………SUPPORT FOR LONG PIECES……………………………………………………CUTTING PICTURE FRAMES, SHADOW BOXES AND OTHER FOUR SIDED PROJECTS……………………………………………CUTTING TRIM MOLDING AND OTHER FRAMES………………………………CUTTING COMPOUND MITERS……………………………………………………8 DUAL RANGE MITER SCALE………………………………………………………9 VERNIER SCALE ………………………………………………………………………9 CUTTING BASE MOLDINGS ......................................................................................11 CUTTING CROWN MOLDING………………………………………………………12 SPECIAL CUTS………………………………………………………………………14 MAINTENANCE………………………………………………………………………14 WARRANTY ................................................................................................................14 TROUBLE SHOOTING GUIDE……………………………………………………15 Important Safety WARNING: When using electric followed to reduce READ ALL INSTRUCTIONS Double Insulation Double insulated tools are constructed insulation or one double thickness system. Tools built with this insulation result, your tool is equipped with a two cords without concern for maintaining a NOTE: Double insulation does not take the place operating this tool. The insulation system is for from a possible electrical insulation failure within CAUTION: WHEN SERVICING USE ONLY IDENTICAL REPLACEMENT Repair or replace damaged cords. Polarized Plugs Polarized plugs (one blade is wider than the other) are used on risk of electric shock. When provided, this plug will fit in the polarized way. If the plug does not fit fully in the outlet, reverse the plug. If it contact a qualified electrician to install the proper outlet. Do not change way. Safety Instructions For All Tools • KEEP GUARD IN PLACE and in working order. • REMOVE ADJUSTING KEYS AND WRENCHES. Form habit of checking to see that keys and adjusting wrenches are removed from spindle before turning tool on. • KEEP WORK AREA CLEAN. Cluttered areas and benches invite accidents. • DON’T USE IN DANGEROUS ENVIRONMENT. Don’t use power tools in damp or wet locations, or expose them to rain. Keep work area well lighted. • KEEP CHILDREN AWAY. All visitors should be kept at a safe distance from work ar...