Use the following operation to replace the corner cutter tray when necessary. Corner Cutter Tray (Corner cutter tray CC-1) (1) Remove the corner cutter tray as illustrated. (2) Install the new corner cutter tray. Note Use Brother authorized cutter units (SC-2 or CC-1) only. Other cutter units, (top/bottom cutter unit and the upper blade of the corner cutter) are not replaceable. Please consult your dealer if these cutter units become damaged. -31 Troubleshooting Problem Cause Solution No activit

This system is available 24 hours a day, 7 days a week. You can use the system to send faxes to any fax machine, not just the one from which you are calling. If you can't resolve a difficulty with your laminator using this manual, call our Fax-Back System, and follow the voice prompts to receive faxed instructions about using the system and an index of Fax-Back subjects. Canada: 1-800-681-9838 Brother on the World Wide Web You can find more information about Brother products, from product specif

(2) Push the roller release lever (green color) and lift the roller holder upwards. (3) Carefully install the film cartridge, square end down. Match the arrow symbol to install new cartridge. Note -Make sure that the shutter of the cartridge is closed when installing the cartridge. -Check the position of the top edge of the film before installing the cartridge. It should be aligned with the cutting line of the cartridge. If necessary, cut away any excess film. - Make sure that the film is on the