Оценок - 1, средний балл: 5
(
)
)
|
Фото и характеристики Royal Sovereign APL-330U |
Фрагмент инструкции
This will cause the laminator to jam. 7. Do not laminate leaves, flower, clothes etc. 8. If the room temperature is low (under 64.F), the ready light may take longer to come on. 9. When unplugging the power plug, grip the plug to pull it out. Pulling the cord may result in electric shock, fire, or damage to the machine. 10. Do not use the machine if the cord is damaged. This may result in electric shock, fire, or other hazards. 11. Do not place objects on the power cord and do not bend it excessively. This may result in electric shock, fire or other hazards. 12. When not using the machine for long periods of time, unplug the power cord from the outlet. 3 cONTeNTS Box contents•••••••••••••••••••••••••••••••••••• 5 Parts•••••••••••••••••••••••••••••••••••••••••••• 5 features••••••••••••••••••••••••••••••••••••••••• 5 Operation••••••••••••••••••••••••••••••••••••••• 6 Troubleshooting••••••••••••••••••••••••••••••••• 7 Specifications••••••••••••••••••••••••••••••••••• 7 Warranty•••••••••••••••••••••••••••••••••••••••• 8 contact Information••••••••••••••••••••••••••••• 8 Pagina en espanol••••••••••••••••••••••••••••••• 9 4 APL-330U BOX cONTeNTS Laminator and pouch film PARTS Power & Reverse Light Reverse Button Cover Temperature Control Button Front Opening Power Button feATUReS four Roller System The four roller system provides precise heat and pressure to ensure high quality lamination. Hot and cold Lamination The laminator can easily be adjusted to handle both hot and cold lamination pouch film. Temperature control Individual settings for different film thicknesses from 3-7 mil. Reverse functions The machine has both a manual and automatic reverse function. 5 OPeRATION Hot Lamination [Before laminating important or unique documents, always test a pouch through the laminator using a similar document.] 1. Place the machine on a flat, sturdy surface and press the power button to turn on the machine. 2. The machine is preset to the 3mil setting. To change the setting, press the temperature control button. The machine will take approximately 4 minutes to warm-up. When the proper temperature is reached, the blinking light will glow steady. 3. Place the item to be laminated into the laminating pouch. 4. Insert the pouch film into the front opening of the laminator. Make sure to place the sealed end of the pouch film in first. All sized pouches should be placed in the center of the front opening to pass through the sensor. 5. The document or photo will then exit out the back of the machine. 6 .If the item is not completely laminated, repeat step 4. NOTe: After inserting the pouch into the laminator, if the laminated item does not pass through all 4 rollers within approximately 15 seconds the automatic reverse function will turn on sending the item out of the front of the machine. If you need to reverse an item after it is inserted into the rollers press the reverse button and the item will exit the front opening. NOTe: Laminated items exiting the machine may be too hot to touch. NOTe: Laminated items will be hot and will easily bend. To keep the item flat, place on a flat surface and allow it to cool. cold Lamination 1. Place the machine on a flat, sturdy surface and press the power button to turn on the machine. 2. Press the temperature setting button until the Cold lamination setting is lit. If the machine was previously used in hot mode, allow approximately 40 minutes to cool down. When the proper temperature is reached, the light will glow steady. 3. Place the document to be laminated on the non-adhesive side of the cold film with the document face down, sealed end first. 4. Insert the document to be laminated into the front opening of the machine. 5. Remove paper liner from the cold film slowly while the document is being inserted into the machine. 6. The document or photo will exit out the back of the machine. NOTe: After inserting the pouch into the laminator, if the laminated item does not pass through all 4 rollers within approximately 15 seconds the automatic reverse function will turn on sending the item out of the front of the machine. If you need to reverse an item after it is inserted into the rollers press the reverse button and the item will exit the front opening. 6 APL-330U TROUBLeSHOOTINg Symptom Solution Motor does not work. Check to make sure machine is plugged in. Check to make sure the power button is turned on. Pouches are not laminating correctly. Make sure that the machine is set to the correct setting. The setting should be the same as the thickness of the pouch you are using. Ex. 3 mil pouch film should be set to 3 mil setting. The machine is beeping and the pouch is returning out of the front of the machine. The automatic reverse function has turned on to retrieve the item. The item you are laminating may be jammed or too large to pass the rollers. Wait for the pouch to exit the front of the machine. You can try laminating again after 15 seconds. The rollers are moving, but the laminated ...