Оценок - 3, средний балл: 3.7
(
)
)
|
Фрагмент инструкции
No batteries. * Adhesive cartridge 9" wide, all others 8.5" wide. StickerMaker Laminator LabelMaker MagnetMaker Makes items up to 9" wide.* Use it anywhere! No heat. No electricity. No batteries. * Adhesive cartridge 9" wide, all others 8.5" wide. StickerMaker Laminator LabelMaker MagnetMaker USER’S USER’SUSER’S MANUAL MANUALMANUAL The ProFinish The ProFinishThe ProFinish™ ™™ Jr JrJr. is perfect for laminating your classroom and office materials. . is perfect for laminating your classroom and office materials.. is perfect for laminating your classroom and office materials. In addition, you can use this handy machine to create magnets or apply adhesive backing In addition, you can use this handy machine to create magnets or apply adhesive backingIn addition, you can use this handy machine to create magnets or apply adhesive backing to your materials. The ProFinish to your materials. The ProFinishto your materials. The ProFinish™ ™™ Jr JrJr. allows you all this quality and flexibility without the . allows you all this quality and flexibility without the. allows you all this quality and flexibility without the use of heat, electricity or batteries. use of heat, electricity or batteries.use of heat, electricity or batteries. It is so easy It is so easyIt is so easy, you can get started on your projects right , you can get started on your projects right, you can get started on your projects right now! now!now! Machine Features Machine FeaturesMachine Features The Xyron® patented Easy Loading Cartridge design allows you to change from adhesive, to laminate, to magnet in just seconds. The Input Tray folds up for easy storage and protects the machine and cartridge from dust and debris. The new Removable Cutter gives you the freedom to trim your document both in and out of the machine. Use it for anything you need to take the edge off! The handle is soft and durable, giving a smooth feel when enhancing items. Built-in Grip/Carry Handle to take your ProFinish™Jr. almost anywhere. 1 W WWith just a few simple, easy ith just a few simple, easyith just a few simple, easy- --to toto- --follow steps, you’ll be protecting and enhancing follow steps, you’ll be protecting and enhancingfollow steps, you’ll be protecting and enhancing your documents and projects: your documents and projects:your documents and projects: Getting Started Getting StartedGetting Started Step 1: Place item flat on the tray, aligned all the way to the left side. Guide the item forward while slowly turning the handle clockwise. Step 2: After the item is completely visible on the output tray, trim the item by sliding the blade across the material. Step 3: Gently lift up the cutter tray and slide it out. Use the cutter to trim the rest of the item if necessary. For adhesive, remove the clear mask and peel off the sticky-back item. How to replace the cutter assembly: Align the cutter sides with the machine. Slide in the cutter with the cut bar resting on the spring arms on the side of the machine until it snaps and locks into place. How to replace the cut blade: Loosen and remove the screw in the cut bar with wrench. Remove colored plastic insert and slide the old blade off the cut bar (safely discard old blade). Carefully slide the NEW ProFinish™ Jr. blade onto clear bar. NOTE: The sharp edge of the blade should be facing inward. Replace the colored plastic insert into clear bar and secure screw with wrench. Verify smooth movement across the entire length of the clear bar. How to load the cartridge: Open the lid to your ProFinish™ Jr. machine. Slide the cartridge into the tracks on the sides of the machine with the exposed rolls of material facing the open lid cover. Close the lid securely. Advance film and trim. 2 Helpful Hints Helpful HintsHelpful Hints Make sure the cartridge is installed correctly prior to using the machine. For best results, turn the handle slowly. Arrange small items (without overlapping them) on the feed tray to maximize your cartridge material use. Use items that are 1/10 of an inch thick or less. Test before using one-of-a-kind items. Watch for the End-of-Roll marker 18 inches from the end of Laminate and Magnet cartridges. To remove marker, simply peel it off the laminate. Adhesive Supply: For best results, apply pressure with finger or dull tool around the edge of the object prior to removing the clear plastic film. If there is excess adhesive around the edges of an item, simply wipe off with your fingers. The adhesive comes right off without sticking to your hands. Clean off adhesive buildup from the rollers with any adhesive remover or rubbing alcohol. Acid-Free Permanent Adhesive is safe for scrapbooking. Acid-Free Repositionable Adhesive is safe for windows, painted walls and doors, and it does not leave any residue on most surfaces. Test on an inconspicuous area first. Laminate Supply: It is not recommended for one-of-a-kind items since the process is permanent (use copies of photos and other valuable items). ...