Оценок - 4, средний балл: 4.8
(
)
)
|
Фрагмент инструкции
Power On/Off Button Save Button After typing the entry, press this button to save the entry to the Blank Disc. Keypad Use these keys to type words or phrases. Shift Key Press and hold this button and a letter to type CAPITAL letters. Purple Button Press and hold this button and a punctuation mark to type puncuation. Green Button Press and hold this button and a European/non-English character to type European/non-English characters. Green Button Purple Button Design and Font Disc Slot Insert your Xyron Design or Font Disc here (label side up). If you do not insert a Disc, the machine will default to the Built-in Font. LCD Screen Characters will appear on this screen as they are typed in. The screen shows two lines at a time. The maximum number of characters per message varies by size. Up to: 40 characters at 100%, 80 characters at 50%, 120 characters at 33%, 160 characters at 25%. LED Lights Lights show what size has been selected. Sizing Button Press this button to choose from 4 different print sizes; you can print up to four lines of text at 25%. Delete Button Press this button to delete the last character typed. Press the Delete and Shift buttons at the same time and hold for 3 seconds to erase the last saved message on a Blank Disc. Press the Delete, Purple and Green buttons at the same time and hold for 3 seconds to delete all saved messages on a Blank Disc. Enter Use this button to move to the next line after typing a word or phrase. Pressing the enter button will automatically reduce the size of the text. Left and Right Arrows Use these buttons to move the cursor left or right in the text on the LCD screen. Press and hold the Shift button and the Left or Right Arrow buttons to scroll between previously saved messages. Up and Down Arrows Use these buttons to maneuver between lines of text on the LCD screen. 3 4 TO DELETE LAST MSG, KEEP PRESSED (fig.8) TO DELETE DISC KEEP PRESSED Composing Messages • Insert a Font Disc (if a different Font is desired) as shown. (fig.1) • Type in words or phrases. (fig.1) • Select a size. (fig.2) • Insert a Blank Disc. (fig.3) • Press the save button. (fig.4) Printing (fig.2) • After saving text to a Blank Disc, remove the Blank Disc from the Xyron® Design Disc™ Maker and insert it into the Xyron® Design Runner™. (fig.5) • Scroll to the image you want to print the images are numbered in the order that you saved them. (fig.3) • Place the white ‘+’ on the right side of the Design Runner on the project where you want to begin printing. (fig.6) • Press and hold the green button. • Wait for the ‘P’ to appear on the bottom left of the LCD screen. (fig.4) Printing (con’t) • Keep the green button pressed and move the Xyron® Design Runner™ to the right until printing is complete. (fig.5) Erasing • Insert a Blank Disc into the Blank Disc Slot. Scroll through the content on the disc by simultaneously pressing and holding the Shift button and Left or (fig.6) Right Arrow buttons to make sure you want to delete the content on the disc. • To erase the last saved message on a Blank Disc, press the Shift button and the Delete button at the same time and hold for 3 seconds (fig.7) • To erase all content on a disc, press the (fig.7) Purple, Green and Delete buttons at the same time and hold for 3 seconds. (fig.8) 5 6 • Place a Xyron® Design Disc™ into the bottom of the Xyron® Design Disc™ Maker. (fig.1) (fig.1) • Each letter on the keypad corresponds to a numbered design. Look at the insert that comes with the Design Disc and use the chart below to select the desired designs. k+i+g= • Only the letters corresponding to your selected designs, not the designs themselves, will show on the LCD screen. • Select the desired size. • Press the save button. 5 7 2 9 11 3 13 (Design Disc insert example) General Information • The Xyron® Design Disc™ Maker will turn off after 5 minutes without use. Any typed text that has not been saved will be lost. • You cannot save to or erase Design or Font discs. • The Xyron Design Disc Maker uses one 9V battery (included). • Use the Xyron® Design Runner™ Accessory Kit with the Xyron® Design Runner™ to print perfectly straight lines, italics and symmetrical arcs. • For portability and convenience, store the Xyron® Design Disc™ Maker with the Xyron® Design Runner™ in the Xyron® Design Runner™ Carry Bag. • The Xyron® Design Disc™ Maker uses only Xyron® Design, Font and Blank Discs. • When a Blank Disc is inserted into the Blank Disc Slot, the available memory will appear on the LCD screen as a fraction. For example, 50/215 means that there is space for up to 50 uppercase, full sized letters on the disc for a total of 215 spaces. • If you plan to print your custom phrases with the Xyron Design Runner using Continuous Mode, program a space at the end of the phrase or design to ensure proper spacing. 7 8 Other Font Discs available from Xyron Bubble Font part#24136 Chalkboard Font part#24138 Distressed Font part#24137 Engraved Font part#24135 9 10 100% 50% 33% 25% Choose...