Оценок - 4, средний балл: 3.8
(
)
)
|
Фрагмент инструкции
WARNING WARNING Do not attempt to plug any device into the vacuum table outlet that does not require 240V. You can be severely shocked, electrocuted or cause a fire. WARNING Never insert objects of any kind through any of the slots on the laminator. You can touch dangerous voltage points or short out parts. You can be severely shocked, electrocuted or cause a fire. ALWAYS USE GOOD SAFETY PRACTICES WHEN OPERATING OR SERVICING THE LAMINATOR AND KNOW HOW TO REACT QUICKLY IN AN EMERGENCY. &DXWLRQ:DUQLQJ/DEHO/RFDWLRQ. Posted at various locations on your Falcon 36 Laminator are important safety labels. PAY CAREFUL ATTENTION TO THESE LABELS AT ALL TIMES! Figure 1-2 shows the location of each of these labels. Do not operate the laminator if the power cord is damaged or frayed. You can be severely shocked, electrocuted or cause a fire. Contact a qualified electrician to replace the cord. WARNING Do not allow anything to rest on the power cord. Do not locate the cord where people can walk on it. You or others can be severely shocked, electrocuted or cause a fire. a GBC Pro-Tech 1997 October Falcon 36 Operation Manual Safety a GBC Pro-Tech 1997 October 1-5 ©1994 HCS, Inc. 800-748-0241 Reorder No.1033R-PT Crush and burn hazard. Stay clear of moving rollers. Stop machine and raise roll before cleaning. WARNING ACHTUNG MISE EN GARDE ©1994 HCS, Inc. 800-748-0241 Reorder No.1033-PT Crush and burn hazard. Stay clear of moving rollers. Stop machine and raise roll before cleaning. WARNING ACHTUNG MISE EN GARDE ©1994 HCS, Inc. 800-748-0241 Reorder No.6001-PT Carefully read Operator's Manual before handling this machine. Observe instructions and safety rules when operating. WARNING ACHTUNG MISE EN GARDE ©1994 HCS, Inc. 800-748-0241 Reorder No.7002-PT SAFETY INSTRUCTIONS SICHERHEITSRICHTLINIEN CONSIGNES DE SECURITE 1.Read and understand the Operation Manual and all safety labels before operating this machine. 2.Only a trained person is to be permitted to operate this machine. Training should include instruction in operation under normal conditions and emergency situations. 3.This machine is to be serviced only by trained and authorized personnel. Follow lockout procedures before servicing. 4.Never reach into the machine for any reason unless the machine is at a COMPLETE STOP. 5.Never leave the machine stopped in such a manner that another worker can start the machine while you are working on or within the machine. 6.Never change or defeat the function of electrical interlocks or other machine “shutdown” switches. 7.Before starting this machine, check that: - All persons are clear of the machine. - No maintenance work is being performed on the machine. - All guards are in place. - All parent rolls are well chucked in the unwind stands. - The machine is free of paper scraps, wraps and jams. 8.There is a potential hazard of entanglement in this machine caused by items such as long hair, loose clothing and jewelry. Make sure your clothing and hair fit closely to your body and that all jewelry, rings and watches are removed. NOTAUS EMERGENCYSTOP ARRETD'URGENCE B O T T O M T O P MOTOR FWD REV SPEED STOP AUTO FANS POWER HEATERS PRO-TECH Engineering Madison,WI 608-246-8844 0 3 6 9 12 15 18 1 O 1 O 1 O 50 75 100 125 150 175 200 225 250 275 300 OUT HI LO PROTECH°F 001-133 50 75 100 125 150 175 200 225 250 275 300 HI LO PROTECH°F 001-133 OUT KBIC BARRIER TERMINAL BOARD LINE FUSE ACCEL P/N 9884 MAX MIN IR CL ARM FUSE I1 P3 P2 P1 I1 F+ F- L1 L2 A+ ANOT AUS EMERGENCYSTOP ARRETD'URGENCE To be serviced only by trained and authorized personnel. Lockout power before servicing. HAZARDOUS VOLTAGE. DANGER GEFAHR ©1994 Hazard Communication Systems, Inc. 800-748-0241 Reorder No. 5025-PT ©1994 HCS, Inc. 800-748-0241 Reorder No. 1012-PT Moving parts can crush and cut. Do not operate with door open. WARNING ACHTUNG MISE EN GARDE To be serviced only by trained and authorized personnel. Lockout power before servicing. HAZARDOUS VOLTAGE. DANGER GEFAHR ©1994 Hazard Communication Systems, Inc. 800-748-0241 Reorder No. 5025-PT ©1994 HCS, Inc. 800-748-0241 Reorder No.6001-PT Carefully read Operator's Manual before handling this machine. Observe instructions and safety rules when operating. WARNING ACHTUNG MISE EN GARDE ©1994 HCS, Inc. 800-748-0241 Reorder No.7002-PT SAFETY INSTRUCTIONS SICHERHEITSRICHTLINIEN CONSIGNES DE SECURITE 1. Read and understand the Operation Manual and all safety labels before operating this machine. 2. Only a trained person is to be permitted to operate this machine. Training should include instruction in operation under normal conditions and emergency situations. 3. This machine is to be serviced only by trained and authorized personnel. Follow lockout procedures before servicing. 4. Never reach into the machine for any reason unless the machine is at a COMPLETE STOP. 5. Never leave the machine stopped in such a manner that another worker can start the machine while you are working on or within the machine. 6. Never change or defeat t...