Оценок - 2, средний балл: 4
(
)
)
|
Фрагмент инструкции
4. Using the finger holes in the blade holder, fit it over the spindle and press firmly into place as indicated. WARNING: USE EXTREME CAUTION WHEN HANDLING BLADES. BLADES ARE SHARP. 5. Fit the lid and click into place as described in the Setting Up section (page 4). 6. Plug in the processor. 7. WARNING: USE THE FOOD PUSHER (14) TO ADD FOOD INTO THE PROCESSOR BOWL (11) THROUGH THE FEEDER TUBE. French Fry Blade (22) 1. Fit the processor bowl and spindle as detailed previously. 2. Using the finger holes in the french fry blade, fit it over the spindle and press firmly into place as indicated. WARNING: USE EXTREME CAUTION WHEN HANDLING BLADES. BLADES ARE SHARP. 3. Fit the lid and click into place as indicated in Setting Up section (page 4). 4. Plug in the processor. 5. WARNING: USE THE FOOD PUSHER (14) TO ADD FOOD INTO THE PROCESSOR BOWL (11) THROUGH THE FEEDER TUBE. Do not overload the bowl. In one operation, you can process maximum 2.2 Lbs. of food. Processing Examples For fine slicing: Blade A (21) -Recommended speed level is between 5-6 (Cucumbers, raw potatoes, lettuce, carrots) For coarse slicing: Blade B (20) -Recommended speed level is between 5-6 (Cabbage, carrots, onions) For fine shredding: Blade C (18) -Recommended speed level is between 5-6 (Carrots, cucumbers, cabbage) For coarse shredding: Blade D (19) -Recommended speed level is between 5-6 (Lettuce, carrots, apples) For French Fries: Disc (22) -Recommended speed level is between 5-6 (Potatoes for French Fries) 7 Juice Extractor CAUTION: Make sure that the unit is unplugged from the power source and the operating button is “OFF” before inserting orremoving attachments. 1. Fit the processor bowl as detailed previously (page 4). 2. Fit the juice extractor/filter (28) into the processor bowl. 3. Fit the juice extractor lid (29) over the extractor and rotate counter clockwise ensuring that the lid tab has clicked into place. 4. Plug in processor. 5. Turn speed control to low (use only on low speed). 6. Use the juice extractor pusher (30) to add fruit into the food tube. 7. If the juice extractor becomes clogged during use, turn the processor off and remove the pulp from it using the spatula. Be sure to switch the appliance to “OFF” position after each use. Make sure the motor stops completely and unplug the unit before disassembling. FOR SAFETY, ALWAYS USE THE PUSHER WHEN PUTTING FRUIT INTO THE FEEDER TUBE -NEVER FEED BY HAND. Do not put your fingers or other objects into the juicer opening while it is operation. If food becomes lodged in the opening, use food pusher or another piece of fruit or vegetable to push it down. When this method of removing food lodged in the opening is not possible, turn the motor off, unplug unit and disassemble juicer to remove the remaining food. Citrus Juice Filter (31) WARNING: ALWAYS OPERATE THE JUICER AT LOWEST SPEED ONLY. DO NOT OPERATE THE CITRUS JUICER AT HIGHER SPEEDS. CAUTION: Make sure that the unit is unplugged from the power source and the operating button is “OFF” before inserting or removing attachments. 1. Fit the processor bowl 4. Insert the juice reamer into the center as detailed previously of the citrus juice filter (31) with its shaft (page 4). inside the central column of the bowl. 2. Fit the citrus juice filter (31) into the processor bowl. 3. Rotate counter clockwise. Ensure that 5. Plug in processor. the citrus juice filter tab 6. Place fruit on juice reamer and hold with has clicked into place. a cupped hand. 7. Operate at lowest speed. WARNING: ALWAYS OPERATE THE JUICER AT LOWEST SPEED ONLY. DO NOT OPERATE THE CITRUS JUICER AT HIGHER SPEEDS. 8 Blender (8) CAUTION: Make sure that the unit is unplugged from the power source and the operating button is “OFF” before inserting or removing attachments and before cleaning. 1. Remove the processor bowl and lid. 2. Remove the safety cover (2). This can only be done once the processor lid has been removed. 3. Place the blender (8) into its location on the processor body with the handle to the left. Turn counter clockwise until the blender clicks into place and the arrows are aligned. Warning: Use extreme caution blades are sharp. Handle carefully. 4. Place food in blender. 5. Place the blender lid (9) and the measuring cap (10) on the blender. 6. Replace the processor bowl and processor lid. Ensure that the lid tab has clicked into place. The blender will not operate if the processor lid is not clicked in place. 7. Plug in the processor. 8. Always operate the blender with the lid in place. TO REMOVE THE BLENDER, YOU MUST FIRST UNLOCK AND REMOVE THE PROCESSOR LID (A). THEN UNLOCK ANS RMOVE THE BLENDER (B) BYTWISTING CLOCKWISE. WARNING: ALWAYS REMOVE THE BLENDER AND FIT THE SAFETY COVER (2) INTO THE RPOCESSOR BODY (1) WHEN USING THE PROCESSOR. CAUTION: Never operate the blender with more than 42 oz. (1250 ml) of liquid or when empty. • Recommended speed levels for blending are between 5 -Max. • Do not overload past the MAX level on the blender. • You can ...