Оценок - 4, средний балл: 4.3
(
)
)
|
Фрагмент инструкции
8 6. Turn the swivel head clockwise until it stops turning and push down until it “clicks” into place. (Fig. 6) Unlocked Position Locked Position Fig. 6 7. Plug in the processor and turn the speed control dial to the desired speed. If the processor does not come on, check that the swivel head and processor lid are both correctlyfitted and locked into place. For safety, always use the foodpusher when putting food into thefeeder tube. NEVER feed by hand. (Fig. 7) Fig. 7 Important: The food processor has a swivel head system. It cannot run unless the swivel head is locked. The swivel head cannot be opened unless the On/Off knob is turned to the “ Off” position. Using the Double Chopping Blade Always disconnect unit from powersource before cleaning or changingaccessories. Warning: USE EXTREME CAUTION WHEN HANDLING THE BLADES. THEY ARE EXTREMELY SHARP. ALWAYS remove the chopping blade protective guards before using. 5 Important Note: Do NOT operate continuously for more than 20seconds at one time. The food processor may be used with one blade or two blades, depending on type of food, finer chopping results, or speed of processing. (Fig. 8) Main Blade Double Blade Spindle Fig. 8 1. To open the food processor, ensure that the speed control dial is in the “Off” position and press the swivel head release button. (Fig. 9) Fig. 9 2. To use with a double blade, carefullyslip the first blade onto the spindle. Hold this blade by the base. Hold second blade from top grip and place second blade on top of first. Turn second blade clockwise to lock into position. (Fig. 10) Fig. 10 3. Then place the blade assembly onto the shaft of the processor Always hold the chopping blade assembly by the top of the spindle. Operating Instructions Operating Instructions Operating Instructions Operating Instructions 4. Place ingredients to be processed in the bowl. 5. Place the processor lid onto the bowl with lip inside of the notch on the food processor body. Rotate the swivel head and press to lock into position. Insert the food pusher into the feeder tube. 6. Plug the processor into a wall outlet. Fig. 11 7. Turn the speed control dial to the desired speed setting. 9. When finished processing the Note: The food processor unit will not ingredients, turn the speed control operate if the swivel head is not locked dial to the “ Off” position and securely. press the swivel head release 8. Keep hands and utensils away from button. The swivel head will the cutting blades while chopping automatically turn to allow you to remove the bowl lid. food to reduce the risk of severe injury to persons or damage to the 10. Remove the chopping blade(s) first food processor. A scraper may be before removing the processed used, but ONLY when the food food. processor is NOT running and has FOR SAFETY, ALWAYS USE been unplugged. Never feed food THE FOOD PUSHER WHEN by hand. Always use the food PUTTING FOOD INTO THE THE pusher. (Fig. 11) FEEDER TUBE. NEVER FEED BY HAND. Processing Examples With The Double Chopping Blade The processing times indicated below are approximate and also depend on the quantity of the food to be processed and the degree of fineness you require. PRODUCT QUANTITY RECOMMENDED SPEED OPERATION TIMES (used in 10 - 20 second intervals) MEAT* 24.5 oz / 700 gr. MAX 15 - 30 SECONDS ONIONS 24.5 oz / 700 gr. 5 - 6 15 - 30 SECONDS NUTS 21 oz / 600 gr. 8-MAX 15 - 30 SECONDS FISH* 24.5 oz / 700 gr. 1 - 8 15 - 30 SECONDS CHEESE 24.5 oz / 700 gr. 1 - 8 15 – 30 SECONDS LIQUIDS (SOUPS) 24.5 oz / 700 gr. 1 - 8 10 – 20 SECONDS CARROTTS 24.5 oz / 700 gr. 6 - 8 30 SECONDS BREAD 4 SLICES 6 - 8 15 – 30 SECONDS APPLES 24.5 oz / 700 gr. 8 – MAX 15 – 30 SECONDS PARSLEY MAX 4 BUNDLES MAX 15 – 30 SECONDS * Remove all bones before processing. ** Always allow food to cool before placing in the bowl. 6 Hints & Tips for Chopping Blades: • The double chopping blade can be used for chopping meat, fish, vegetables, cheese, etc. setting the speed to maximum. • For finer chopping, increase the length of time you process. • For coarser chopping, use the pulse button for a few seconds and monitor food texture. • Pre-cut larger pieces to make them fit into the feeder tube. When chopping hard foods (e.g. meat, cheese) cut into 1-inch ( 2.4 cm) cubes. Slicing, Shredding, Grating & Julienne Blade Assembly Caution: Make sure that the unit is unplugged from the power sourceand the speed control dial is in the “Off” position. Press the swivel head release button so that the swivel head is in the unlocked position before inserting or removing attachments. Caution: Do not operate the unit for intervals longer than 20 seconds. If longer chopping or mixing is required, run for 20 seconds, allow the motor to stop and run again for another 20 seconds. 1. Place the blade of your choice on the blade holder. Insert the longer tab on the side of the blade holder first. (Fig. 12) Longer Tab Fig. 12 2. Press the other end of the blade until it clicks into place. (Fig. 13) Fig. 13 3. Place the ...