Оценок - 4, средний балл: 3.8
(
)
)
|
Фрагмент инструкции
When properly cared for, it will give you years of rugged, trouble-free performance. WARNING: To reduce the risk of injury, the user must read and understand the operator’s manual before using this product. Thank you for buying a Ryobi product. SAVE THIS MANUAL FOR FUTURE REFERENCE 2 TABLE OF CONTENTS nIntroduction2 ..nGeneral Safety Rules3 ..nSpecific Safety Rules4 ..nSymbols5-6 ....nElectrical7 nFeatures8 ....nAssembly9-11 ..nOperation11-13 nAdjustments14 ..nMaintenance15 nTroubleshooting15 ....nParts Ordering / Service16 INTRODUCTION This tool has many features for making its use more pleasant and enjoyable. Safety, performance, and dependability have been given top priority in the design of this product making it easy to maintain and operate. GENERAL SAFETY RULES WARNING: READ AND UNDERSTAND ALL INSTRUCTIONS. Failure to follow all instructions listed below may result in electric shock, fire, and/or serious personal injury. READ THESE INSTRUCTIONS n Read the operator’s manual carefully. Be thoroughly familiar with the controls and the proper use of the equipment. Know how to stop the unit and disengage the controls quickly. n Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes. n Double insulated tools are equipped with a polarized plug (one blade is wider than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install a polarized outlet. Do not change the plug in any way. Double insulation eliminates the need for the three-wire grounded power cord and grounded power supply system. n Avoid body contact with grounded surfaces such as pipes, radiators, ranges, and refrigerators. There is an increased risk of electric shock if your body is grounded. n Don’t expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock. n Do not abuse the cord. Never use the cord to carry the tools or pull the plug from an outlet. Keep cord away from heat, oil, sharp edges, or moving parts. Replace damaged cords immediately. Damaged cords increase the risk of electric shock. n Use outdoor extension cords marked “W-A” or “W.” These cords are rated for outdoor use and reduce the risk of electric shock. n Never allow children to operate the equipment. Never allow adults to operate the equipment without proper instruction. n Always wear safety glasses with side shields. Everyday glasses have only impact resistant lenses. They are NOT safety glasses. Following this rule will reduce the risk of eye injury. n Wear heavy long pants, boots, and gloves. Avoid loose garments or jewelry that could get caught in moving parts of the machine or its motor. n Do not operate the equipment while barefoot or when wearing sandals or similar lightweight footwear. Wear protective footwear that will protect your feet and improve your footing on slippery surfaces. n Secure long hair so it is above shoulder level to prevent entanglement in any moving parts. n Do not operate the cultivator while under the influence of alcohol or drugs. n Do not put hands or feet near or under tines. n Exercise caution to avoid slipping or falling. n Avoid accidental starting. Be sure the switch trigger is not engaged before plugging in. n Never pick up or carry a machine while the tines are turning or the motor is running. n Keep machine in good working condition. n Check all nuts, bolts, and screws at frequent intervals for proper tightness to be sure the equipment is in safe working condition. n Keep the unit free of grass, leaves, or grease to reduce the chance of a fire hazard. n Do not use tool if switch does not turn it on or off. Any tool that cannot be controlled with the switch is dangerous and must be repaired. n Disconnect the plug from power source before making any adjustments, changing accessories, or storing the tool. Such preventive safety measures reduce the risk of starting the tool accidentally. n Before cleaning, repairing, or inspecting, unplug the cultivator and make certain all moving parts have stopped. n Never spray water directly into the motor compartment of the cultivator. n Service on the cultivator must be performed by qualified repair personnel only. Service or maintenance performed by unqualified personnel could result in injury to the user or damage to the product. n Use only identical replacement parts when servicing the cultivator. Use of unauthorized parts may create a risk of serious injury to the user, or damage to the product. SPECIFIC SAFETY RULES n Do not use near underground electric cables, telephone lines, pipes, or hoses. If in doubt, contact your utility or telephone company to locate underground services. n Make sure your extension cord is in good condition. When using an extension cord, be sure to use one hea...