Оценок - 3, средний балл: 3.3
(
)
)
|
Фрагмент инструкции
A wire gage size (A.W.G.) of at least 16 is recommended for an extension cord 100 feet or less in length. A cord exceeding 100 feet is not recommended. If in doubt, use the next heavier gage. The smaller the gage number, the heavier the cord. 22. OUTDOOR USE EXTENSION CORDS. When tool is used outdoors, use only extension cords suitable for use outdoors. Outdoor approved cords are marked with the suffix W-A, for example -SJTW-A or SJOW-A. 23. KEEP CUTTERS CLEAN AND SHARP. Sharp cutters minimize stalling and kickback. 24. KEEP HANDS AWAY FROM CUTTING AREA. Keep hands away from cutters. Do not reach underneath work while cutter is rotating. Do not attempt to remove material, scrap, or chips while cutter is rotating. 25. NEVER USE IN AN EXPLOSIVE ATMOSPHERE. Normal sparking of the motor could ignite fumes. 26. INSPECT TOOL CORDS PERIODICALLY and if damaged, have repaired at your nearest authorized service center. Stay constantly aware of cord location. Page 4 RULES FOR SAFE OPERATION (Continued) 27. INSPECT EXTENSION CORDS PERIODI-it still does not fit, contact a qualified electrician CALLY and replace if damaged. to install the proper outlet. Do not change the plug in any way. 28. KEEP HANDLES DRY, CLEAN, AND FREE FROM OIL AND GREASE. Always use a clean 36. DO NOT USE TOOL UNDER “BROWNOUT” cloth when cleaning. Never use brake fluids, OR OTHER LOW VOLTAGE CONDITIONS. gasoline, petroleum-based products or any strong Also, do not use with any device that could cause solvents to clean your tool. the power supply voltage to change. 29. STAY ALERT. Watch what you are doing and 37. SAVE THESE INSTRUCTIONS. Review them use common sense. Do not operate tool when frequently and use them to instruct others who you are tired. Do not rush. may use this tool. If you loan someone this tool, loan them these instructions also. 30. CHECK DAMAGED PARTS. Before further use of the tool, a guard or other part that is damaged should be carefully checked to determine that it will operate properly and perform its intended function. Check for alignment of moving parts, binding of moving parts, breakage of parts, mounting, and any other conditions that may affect its operation. A guard or other part that is damaged must be properly repaired or replaced by an authorized service center unless indicated elsewhere in this instruction manual. 31. DO NOT USE TOOL IF SWITCH DOES NOT TURN IT ON AND OFF. Have switches replaced by an authorized service center. 32. INSPECT FOR and remove all nails from lumber before trimming. 33. DRUGS, ALCOHOL, MEDICATION. Do not operate tool while under the influence of drugs, alcohol, or any medication. 34. WHEN SERVICING USE ONLY IDENTICAL RYOBI REPLACEMENT PARTS. 35. POLARIZED PLUGS. To reduce the risk of electric shock, this equipment has a polarized plug (one blade is wider than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: • lead from lead-based paints, • crystalline silica from bricks and cement and other masonry products, and • arsenic and chromium from chemically-treated lumber. Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles. SAVE THESE INSTRUCTIONS The operation of any laminate trimmer can result in foreign objects being thrown into your eyes, which can result in severe eye damage. Before beginning power tool operation, always wear safety goggles or safety glasses with side shields and a full face shield when needed. We recommend Wide Vision Safety Mask for use over eyeglasses or standard safety glasses with side shields. SAFETY GLASSESSAFETY GLASSESFORESIGHTIS BETTERTHAN NO SIGHTFORESIGHTIS BETTER THAN NO SIGHT WEAR YOUR WARNING: Look for this symbol to point out important safety precautions. It means attention!!! Your safety is involved. Page 5 UNPACKING UNPACKING Your trimmer has been shipped completely assembled and ready for use. After removing it from the carton, inspect it carefully to make sure no breakage or damage has occurred during shipping. If any parts are damaged or missing, contact your nearest Ryobi dealer to obtain replacement parts before attempting to operate trimmer. A 1/2 in. (13 mm) diameter flush trim bit, owner's operating manual, warranty registration and two wrenches are included in the carton. WARNING: If any parts are missing do not operate your trimmer until the missing parts are replaced. Failure to do so could result in possible serious injury. FEATURES KNOW YOUR TRIMMER See Figure 2. Before attempting to use your tri...