Оценок - 4, средний балл: 4.3
(
)
)
|
Фрагмент инструкции
Loosen the necessary lock knobs (Figure 1), then lower the appropriate dust shield. Figure 1. Model T10115 identification. Cleaning Your table surface may be cleaned with a damp rag. if your table surface gets gummy from wood pitch, you can use a non-corrosive blade cleaner to easily remove it without harming the tabletop surface. DO NOT clean with products such as brake parts cleaner, acetone, or gasoline that will harm the paint on the table surface. To remove sawdust that may become trapped beneath the table, lift up on the table sections to remove them, then vacuum the inside of the table. If you need help with your new item, call our Tech Support at: (570) 546-9663. COPYRIGHT © NOVEMBER, 2008 BY GRiZZLY iNDUSTRiAL, iNC. WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROvAL OF GRIzzLY INDUSTRIAL, INC. #JB11329 PRiNTED In TAiWAN T10115 Parts Breakdown and List 2 9 REF PART # DESCRIPTION 1 PT10115001 DUST SHIELD REAR 2 PT10115002 KNOB 1/4-20 x 3/8 3 PT10115003 DUST SHIELD RIGHT 4 PT10115004 HANDLE 5 PT10115005 BASE 6 PS18 PHLP HD SCR 10-24 X 1/4 7 PT10115007 DUST PORT 2-1/2 8 PT10115008 TABLE TOP REF PART # DESCRIPTION 9 PT10115009 DUST SHIELD LEFT 10 PT10115010 FOOT PAD M6-1 X 20 11 PN01M HEX NUT M6-1 12 PT10115012 STOPPER BOLT 13 PT10115013 GROMMET 14 PT10115014 STOPPER NUT 15 PS12 PHLP HD SCR 1/4-20 X 5/8 16 PT10115016 GRIZZLY LABEL T10115 Benchtop Downdraft Table 2...