Оценок - 4, средний балл: 3.3
(
)
)
|
Фрагмент инструкции
Given the existing risk of foot problems for diabetics, this unit must not be used prior to consulting your doctor. 4 Adapter Tab for Grounding Screw Figure B Grounding Pin Grounding Instructions This product must be grounded. If it should malfunction or breakdown, grounding provides a path of least resistance for the electric current to reduce the risk of electric shock. This product is equipped with a cord having an equipment-grounding conductor and a grounding plug. The Figure A plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances. DANGER Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the product is properly grounded. Do not modify the plug provided with the product - if it will not fit the outlet, you may temporarily use an adaptor (such as the one shown in Figure B) until you have a proper outlet (such as the one shown in Figure C) installed by a qualified electrician. This product is for use on a nominal 120-volt circuit, and has a grounding plug that looks like the plug illustrated in Figure A. A temporary adapter that looks like the adapter illustrated in Figure B may be used to connect this plug to a 2-pole receptacle as shown in Figure D if a properly grounded outlet is not available. The temporary adapter should be used only until a properly grounded outlet Figure C can be installed by a qualified electrician. The tab for grounding screw Figure B extending from the adapter must be connected to a permanent ground such as a properly grounded outlet box cover. Whenever the adapter is used, it must be held in place by a metal screw. See Figures D and E. Grounded Outlet Figure C Metal Screw Figure D Figure E 5 BubbleSpa™ Features • Hydro-healing™ therapy provides a relaxing massage • Super Quiet technology for complete relaxation • Jumbo pedicure center with 2 Attachments - Pumice Stone and Cleansing Brush • Raised nodes in floor reinvigorate tired, sore feet • Heat helps maintain water temperature • Easy Tote™ Handle to fill, carry and empty with ease Instructions for Use 1. Ensure that the unit is unplugged before filling with water. Lift the carry handle into the full upright position (Fig 2) and carry to a water faucet. Fill with warm water to the fill line located on the inside of the tub (Fig 1). When finished, carry tub to a flat, steady surface for use and place handle in resting position (Fig 2). NOTE: Heat will only help to maintain the temperature of water placed inside the footbath. It will not heat cold water. For a warm water massage, fill the unit with warm water. 2. Plug the unit into a 120 volt household outlet. 3. Sit down and with the touch of your toe, press the power button (may also be turned on by hand). Press again to turn the feature off. 4. While seated, place your feet in the spa. 5. To use the pedicure center: a. Select the desired attachment from the Side Storage (Fig 1): Pumice Stone: Contoured pumice cradles the heels and balls of your feet to smooth and soften dry skin Cleansing Brush: Use to cleanse and exfoliate your feet b. Simply place the attachment on the pedicure center post (Fig 1). c. Rub your feet back and forth over the attachment. 6. Enjoy a deep penetrating massage by sliding feet back and forth over the raised nodes on the footbath floor. 7. To empty: First, unplug the unit. Lift the carry handle into the full upright position and take the footbath to the closest drain. Tip the unit, allowing water to pour out along the drain spout. DO NOT pour water over the control panel (Fig 1.) 6 Caution: To avoid injury and irreparable damage, always remain seated when using this footbath. Never stand on or in the unit. CAUTION: THIS UNIT CAN ONLY RUN WITH WATER IN IT. DO NOT USE WITHOUT WATER. CAUTION: DO NOT FILL WATER OVER THE FILL LINE. Figure 2 Upright Resting Maintenance To Clean Unplug the unit and allow it to cool before cleaning. Clean only with a soft, damp cloth and mild cleansing agent. • After cleaning, wipe surfaces with a dry cloth. • Never use strong abrasives, detergents or cleansing agents. • Periodically straighten cord if it becomes twisted. To Store Unplug the appliance from the outlet and allow to cool and dry. • Store in its box or a clean, dry place. • Do not hang the unit by the power cord. • This appliance is designed for household use only. Power Button Drain Spout Easy Tote™ Handle Fill Line Figure 1 7 Pumice Stone Cleaning BrushCenter Post Side Storage HoMedics Service Center 1.800.466.3342 8:30–5:00 p.m. (EST) M–F Mail To: HoMedics Service Center Dept. 168 3000 Pontiac Trail Commerce Township, MI 48390 Email: cservice@homedics.com TWO YEAR LIMITED WARRANTY HoMedics sells its products with the intent that they are free of defects in manufacture and workmanship for a period of two years from the date of original purchase, exce...