Оценок - 4, средний балл: 3.5
(
)
)
|
Фрагмент инструкции
3 Straighten your hair Straighteners are powerful styling tools and must always be used with care. As with all straighteners that reach salon-high temperatures, do not use the appliance frequently to avoid damage to the hair. If you use the straightener incorrectly or at the wrong temperature setting, you could overheat your hair or even burn it.Always make sure you select a temperature setting that is suitable for your hair type.Always select a low setting when you use the straightener for the first time. Hair Type Temperature Setting Coarse, curly, hard-to-straighten Mid to High (170 .C and above) Fine, medium-textured or softly waved Low to Mid (160 .C and below) Pale, blonde, bleached or colour-treated Low (Below 160 .C) 1 Connect the mains plug to a mains socket. 2 Press and hold the button (Fig. 1) until the light on the display is on. » The default temperature setting is displayed. » The SONIC indication turns on. 3 Press the button to select a suitable temperature setting for your hair. • To lock the straightening plates, slide the switch downwards (Fig. 3). » If you lock the plates with the locking slide, the straightener heats up more quickly. » When the straightener heats up to the selected temperature setting, the READY indication turns on. » The remaining usage time of the straightener is displayed. 4 Comb your hair and take a section that is not wider than 2 inches for straightening. • To unlock the straightening plates, slide the switch upwards. 5 Place it between the straightening plates and press the handles together. » The sonic vibration starts. 6 Slide the straightener down the length of the hair in a single motion (max. 5 seconds) from root to end. 7 After 20 seconds, repeat step 6 until you achieve the desired look. 8 To straighten the rest of your hair, repeat steps 4 to 7. SONIC Vibration The appliance is equipped with sonic vibration.When you switch on the appliance, the word ‘SONIC’ appears on the display. The vibration does not start when you switch on the appliance or when you activate the sonic vibration mode, but when you press the straightening plates together. To activate and deactivate the sonic vibration mode, use the sonic vibration button (Fig. 2). Note: The sonic vibration does not work when the straightening plates are locked. If the plates are locked, move the locking slide backwards to unlock the plates. Note: When the sonic vibration is on, the plates make a rattling sound when they are only slightly in contact.This does not affect the performance of the appliance. • To switch sonic vibration off, press the button until the SONIC indication turns off. • To resume sonic vibration, press the button again. 4 Cleaning Never immerse the appliance in water or any other liquid, nor rinse it under the tap. 1 Switch off the appliance and unplug it. 2 Let the appliance cool down completely on a heat-resistant surface. 3 Clean the appliance with a damp cloth. 5 Storage Never wind the mains cord round the appliance 1 Switch off the appliance and unplug it. 2 Let the appliance cool down completely on a heat-resistant surface. 3 Store the appliance in a safe and dry place. • You can also hang it with the hanging loop. 6 Troubleshooting This chapter summarises the most common problems you could encounter with the appliance. If problems arise with your hairdryer and you cannot solve them with the information below, please contact the nearest Philips service centre or the Philips Consumer Care Centre in your country. The appliance does not work at all. • Make sure that the mains socket is live. • Make sure that the mains voltage indicated on the appliance corresponds to the local mains voltage. • Ensure that you switch on the appliance. • If the appliance automatically switches off, switch on the appliance again. • If the mains cord is damaged, you must have it replaced by Philips, a service centre authorised by Philips or similarly qualified persons in order to avoid a hazard. The sonic vibration does not work. • Make sure that the straightening plates are pressed together. • Press the sonic vibration button to activate the sonic vibration mode. • Push the locking slide backwards to unlock the straightening plates. Guarantee and service If you need information or if you have a problem, please visit the Philips website at com or contact the Philips Customer Care Centre in your country (you find its phone number in the worldwide guarantee leaflet). FULL TWO-YEAR WARRANTY Philips Electronics North America Corporation warrants each new Philips product, model HP4666/15/20 (except cord), against defects in materials or workmanship for a period of two years from the date of purchase, and agrees to repair or replace any defective product without charge. IMPORTANT:This warranty does not cover damage resulting from accident, misuse or abuse, lack of reasonable care, the affixing of any attachment not provided with the product or loss of parts or subjecting the product to any but ...
Эта инструкция также подходит к моделям:Косметические приборы - HP4666/15 (393.42 kb)